DOOR WILL NOT CLOSE OR LOCK PROPERLY
Whirlpool Washer Door Strike WP8181651, Replaces 8181651, Fixes Door will not close or lock properly
Genuine Whirlpool washer door strike. It attaches to the washer door and activates the door switch when the door is closed.
Part WP8181651Replaces 8181651Whirlpool
Genuine Whirlpool washer door strike. It attaches to the washer door and activates the door switch when the door is closed.
Is This the Right Part?
Part NumberWP8181651
Replaces8181651
ManufacturerWhirlpool
Appliance TypeWasher
Part TypeDoor Strike
✅ Cross Reference Information
Current Part NumberWP8181651
Replaces8181651
Common Symptoms
- Washer door will not stay closed
- Washer will not start because the door-lock condition is not detected
- Door-lock or DL-related error may occur
- Door strike is visibly cracked, bent, loose, or broken
Check Before Replacing
- Unplug the washer before inspection.
- With the door open, visually inspect the strike for cracks, bending, looseness, missing material, or misalignment.
- Close the door gently and check whether the strike enters the lock opening without excessive force or interference.
- If the strike appears intact, inspect the door-lock opening and surrounding door area for obstructions or damage; the lock assembly or door alignment may be the actual cause.
- Do not operate the washer with a damaged or missing strike, and do not bypass the door-lock system.
Pro Tip
Before replacing the strike, compare its position with the lock opening and check for a loose mounting point or door sag; a new strike may not correct a separate alignment or lock-assembly problem.
Part Details
Part NumberWP8181651
Part TypeDoor Strike
ManufacturerWhirlpool
Appliance TypeWasher
Primary FunctionThe WP8181651 door strike engages the washer door-lock assembly and actuates the door switch when the door is closed, allowing the washer to verify that the door is secured.
Cross References8181651
Key Features
- Genuine Whirlpool OEM washer door strike
- Designed for front-load washer door-lock engagement
- Activates the door switch when the door is closed
- Replaces previous Whirlpool part number 8181651
Installation Notes
- Disconnect electrical power before beginning the repair.
- Wear work gloves to protect hands from sharp edges around the door and cabinet.
- Remove the old strike and install the replacement in the same location, ensuring it is seated and secured without forcing it.
- After installation, close the door gently and confirm that the strike aligns with and engages the lock before restoring normal use.
- Verify the exact washer model before installation because the part is model-specific.
Verified Compatible Models
GHW9100LQ0, GHW9100LQ1, GHW9100LQ2, GHW9100LW0, GHW9150PW0, GHW9160PW0, GHW9250ML0, GHW9250ML1, GHW9250ML2, GHW9250MQ0, GHW9250MQ1, GHW9250MQ2, GHW9250MT0, GHW9250MT1, GHW9250MT2
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
