Whirlpool Range Surface Burner Base (Medium) / Semi-Rapid Surface Burner Head WP8286814, Replaces 8286814

Genuine Whirlpool OEM medium surface burner base/head for gas ranges and cooktops. It distributes gas through burner ports to create an even flame and is used in specified burner positions, including right-rear and left-front applications on supported models.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Burner fails to light despite ignition clicking when the burner head is dirty, wet, obstructed, or misaligned.
• Uneven flame distribution across the burner ports.
• Delayed ignition or repeated ignition attempts at the affected burner.
• Flame lifting, wavering, or showing abnormal color when the burner head is not seated correctly or ports are obstructed.

Check Before Replacing

• Turn the burner control to OFF and allow the cooktop to cool completely before inspection.
• Verify that the burner base/head is seated flat and aligned in its specified position, with the burner cap properly positioned.
• Visually inspect the burner ports and openings for food residue, moisture, or visible obstruction; clean and dry the removable burner components according to the appliance owner’s instructions.
• Compare the affected burner’s flame pattern with another burner of the same type, without disassembling gas connections or adjusting orifices.
• After reassembly, confirm that the flame is stable and predominantly blue; stop use and seek qualified service if ignition is unreliable or the flame remains abnormal.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM surface burner base/head.
• Medium-size burner component.
• Designed for specified burner positions on compatible Whirlpool-family gas ranges and cooktops.
• Removable burner component with distributed gas ports for an even flame.
• Whirlpool manufacturer number WP8286814; prior number 8286814 is documented by Whirlpool.

Installation Notes

• Turn all burner controls OFF and allow the appliance to cool before removing or installing the burner component.
• Confirm the replacement is intended for the exact appliance model and burner position before installation.
• Install the burner base/head flat and in the same specified position as the removed component; ensure the burner cap and igniter area are correctly positioned.
• Do not alter gas orifice settings, gas connections, or ignition wiring as part of this component replacement.
• After installation, test only according to the appliance owner’s or service instructions; discontinue use if the flame is unstable, predominantly yellow, lifts, or fails to ignite normally.

Verified Compatible Models

AGC6540KFB00, AGC6540KFS00, AGC6540KFS05, AGC6540KFW00, GLS3665RS03, ICS500DS00, ICS655DS00, KCGS350ESS00, KCGS350ESS05, KCGS350ESS06, KCGS356ESS00, KCGS356ESS05, KCGS356ESS06, KCGS550ESS00, KCGS550ESS01

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.