Whirlpool Range Surface burner base / burner head, large; right front, center, and certain left-front positions WP8286815, Replaces 8286815

Genuine Whirlpool OEM gas surface-burner head/base that distributes gas through its ports to produce an even cooking flame. The part is documented for use in specified range and cooktop models and positions.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Flame is uneven, weak, or unstable after the burner head is correctly seated.
• Flame pattern is disrupted by damaged, obstructed, or corroded burner ports.
• The burner may fail to light consistently when the burner head is misaligned or the electrode opening is not correctly positioned.

Check Before Replacing

• Turn off the burner, shut off the gas supply if servicing is required, and allow all components to cool completely.
• Remove the burner cap and visually inspect the burner head for cracks, corrosion, deformation, or blocked ports.
• Confirm that the burner head is the correct size and is seated flat in its intended position.
• Verify that the burner-head opening is aligned with the igniter/electrode and that the cap is correctly positioned.
• Clean only according to the appliance owner's manual; do not enlarge, drill, or otherwise modify the burner ports.
• After reassembly, observe the flame briefly and discontinue use if the flame remains abnormal or gas odor is present.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM burner head/base.
• Designed for the large rapid surface burner on specified gas ranges and cooktops.
• Distributes gas through holes or slots to create an even cooking flame.
• Documented for specified left-front, right-front, and center burner positions depending on the appliance model.
• Replaces manufacturer part number 8286815.

Installation Notes

• Shut off the gas supply and disconnect electrical power before servicing.
• Allow the cooktop and burner components to cool, and wear suitable hand protection.
• Remove only the components necessary to access the burner head, retaining small screws and burner parts.
• Install the replacement head in the same specified position, ensuring it sits flat and the electrode opening is aligned correctly.
• Reinstall the burner cap and grate as applicable, then restore power and gas only after all parts are correctly assembled.
• Test the burner cautiously; if ignition, flame shape, or gas odor is abnormal, shut it off and obtain qualified service.

Verified Compatible Models

AGC6540KFB00, AGC6540KFS00, AGC6540KFS05, AGC6540KFW00, GLS3665RS03, ICS500DS00, KCGS356ESS00, KCGS356ESS05, KCGS356ESS06, KCGS550ESS00, KCGS550ESS01, KCGS550ESS05, KCGS556ESS01, KCGS556ESS02, KCGS556ESS05

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.