WP8540108 Front Load Washer Bellow Clamp
WP8540108 Front Load Washer Bellow Clamp

Whirlpool Front-load washer or washer-dryer combo Boot seal retaining ring / inner bellow clamp WP8540108

XPart Number XP10001241
$16.99
$26.15
In stock and ready for shipping
Buying Options: Certified Pre-Owned — Item #0075

Choose an available buying option.
Check Fit & Find Parts
Bubba checks verified models, product descriptions, cross-references and store data. Find your model number →

Frequently Bought Together
WATER LEAKING FROM THE WASHER DOOR-BELLOW AREA DUE TO A LOOSE, DAMAGED, OR RUSTED CLAMP

Whirlpool Front-load washer or washer-dryer combo Boot seal retaining ring / inner bellow clamp WP8540108, Fixes Water leaking from the washer door-bellow area due to a loose, damaged, or rusted clamp

Whirlpool OEM rear boot-seal clamp that secures the washer door bellow to the outer tub.

Part WP8540108Replaces 8540108Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.

Is This the Right Part?

Part NumberWP8540108
Replaces8540108
ManufacturerWhirlpool
Appliance TypeFront-load washer or washer-dryer combo
Part TypeBoot seal retaining ring / inner bellow clamp

✅ Cross Reference Information

Current Part NumberWP8540108
Verified Previous OEM Numbers8540108

Common Symptoms

  • Door bellow is loose or displaced at the outer-tub connection
  • Water leakage from the bellow-to-tub area when the clamp is damaged, distorted, or no longer retains the bellow

Check Before Replacing

  • Disconnect electrical power before inspection.
  • Inspect the rear/inner edge of the door bellow to confirm that its lip is seated evenly on the outer-tub rim.
  • Inspect the clamp for displacement, distortion, corrosion, or a relaxed or missing spring section.
  • Check for water tracks or residue around the bellow-to-tub joint; this indicates a seal-area leak but does not by itself prove the clamp is defective.
  • Confirm that the required part is the rear/inner bellow clamp rather than the separate front-panel bellow clamp.

Pro Tip

Confirm that the bellow is evenly seated on the tub rim before replacing the clamp; a displaced bellow can also cause leakage.

Part Details

Part NumberWP8540108
Part TypeBoot seal retaining ring / inner bellow clamp
ManufacturerWhirlpool
Appliance TypeFront-load washer or washer-dryer combo
Primary FunctionSecures the door bellow to the outer tub and helps maintain the sealed connection during operation.

Installation Notes

  • Disconnect electrical power before servicing.
  • Use the model-specific service procedure for access and clamp placement.
  • Ensure the bellow lip is evenly seated on the outer-tub rim before securing the clamp.
  • Do not substitute the separate front-panel bellow clamp for this rear/inner clamp.

Verified Compatible Models

110.46462500, 110.46472500, 110.47532600, 110.47561601, 110.47581601, 11047511700, 11047512602, 11047531700, 11047532602, 11047532603, 11047542601, 11047542602, 11047542603, 11047561602, 11047567700, 3LCHW9100WQ0, 3LCHW9100YQ0, CET8000AQ1, CET9000GQ0, CET9100GQ0, CGT8000AQ0, CGT9000GQ0, CGT9100GQ0, CHW8990AW0, CHW8990BW0, CHW8990CW0, CHW8990XW0, CHW9050AW0, CHW9060AW0, CHW9150GW0, CHW9160GW0, CHW9900VQ0, CHW9900VQ1, CHW9900WQ0, KENMORE 11047542600, KENMORE 11047542604, MAH22PDAGW0, MAH22PDAWW1, MAH22PDAXW0, MHN30PRCWW0, MHWZ600TB02, MHWZ600WR00, WFW8300SW00, WFW8300SW05, WFW9250WR01, WFW9250WW00, WHIRLPOOL WFW8300SW04, YWFW9050XW01

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.

What Customers Say

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Phone
1-877-899-7278
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions
Map showing warehouse location at 101 Trillium Dr, Kitchener
View on Google Maps