Whirlpool Dryer Drum Drive Belt WP8547157, Replaces 8547157

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Drum does not tumble or spins unusually easily by hand
• Squealing, squeaking, thumping, or other belt-related operating noise
• Visible belt fraying, cracking, stretching, or breakage
• Burning-rubber odor may occur if the belt slips or is damaged

Check Before Replacing

• With the dryer disconnected from power, manually rotate the drum and note whether it turns unusually freely; this can indicate a broken belt but is not conclusive.
• After disconnecting power, visually inspect the accessible belt area for fraying, cracks, glazing, stretching, or a complete break.
• If the belt is being replaced, inspect the belt path and tensioner area for obvious misrouting or interference before reassembly.
• Confirm the replacement belt matches the exact dryer model and the original belt's rib-and-groove configuration.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before servicing the dryer; gas dryers should also have the gas supply handled according to the appliance's service instructions.
• Follow the disassembly and belt-routing procedure for the exact dryer model because cabinet and bulkhead access vary.
• Record or photograph the original belt routing before removal when possible.
• Install the belt with the correct ribbed/grooved orientation and ensure it is seated correctly around the drum, idler pulley, and motor pulley before reassembly.
• Use appropriate hand protection when handling internal dryer components and sheet-metal panels.

Verified Compatible Models

11067032600, 11067032601, 11067042600, 11067042601, 11067052600, 11067062600, 11067072600, 11067082600, 11067086600, 11067087600, 11067092600, 11068062800, 11068062801, 11068072800, 11068072801

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.