MOTOR RUNS BUT THE DRYER DRUM DOES NOT ROTATE
Whirlpool Dryer Drum Belt WP8547168, Fixes Motor runs but the dryer drum does not rotate
Genuine Whirlpool dryer drum drive belt. The belt attaches to the motor pulley and rotates the dryer drum. One retailer specification lists an approximate length of 92.79 inches; dimensional details are omitted from the verified description because sources vary slightly.
Part WP8547168Replaces 8547168Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWP8547168
Replaces8547168
ManufacturerWhirlpool
Appliance TypeDryer
Part TypeDryer Drum Belt
✅ Cross Reference Information
Current Part NumberWP8547168
Replaces8547168
Common Symptoms
- Drum does not tumble
- Dryer may make a belt-related noise or operate without rotating the drum
- Dryer may stop tumbling if the belt is worn, damaged, or broken
Check Before Replacing
- Disconnect electrical power before inspecting the belt or opening the dryer cabinet.
- With power disconnected, observe whether the drum turns freely by hand; unusual resistance may indicate another mechanical issue.
- Inspect the visible belt area, where accessible, for breakage, severe wear, fraying, or loss of tension.
- If the motor can be heard while the drum does not rotate, have the belt and related drive components evaluated; this symptom is not conclusive by itself.
Pro Tip
When replacing the belt, inspect the idler pulley and motor pulley for abnormal wear or binding, because belt problems can involve the surrounding drive components.
Part Details
Part NumberWP8547168
Part TypeDryer Drum Belt
ManufacturerWhirlpool
Appliance TypeDryer
Primary FunctionTransfers motor power around the dryer drum to rotate the drum during a drying cycle.
Installation Notes
- Disconnect power before servicing the dryer.
- Route the belt around the drum, idler/tension pulley, and motor pulley according to the appliance service instructions.
- Center the belt on the drum and confirm that it is properly tensioned before reassembly.
- After installation, restore power and verify that the drum rotates normally; stop if the belt slips, binds, or makes abnormal noise.
Verified Compatible Models
MED6300TQ0, MED6400TB0, MED6400TQ0, MED6600TQ0, MGD6300TQ0, MGD6300TQ1, MGD6400TB0, MGD6400TQ0, MGD6600TQ0, MGD6600TQ1, WED6200SW0, WED6400SW0, WGD6200SW1, WGD6400SB1, WGD6600VU1
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
