Whirlpool Appliance Bolt WP8576635

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Coin slide shifts or rattles in the meter case
• Coin slide does not fully seat or return smoothly
• Coin insertion or slide operation does not reliably activate the vend mechanism
• Visible missing, loose, or damaged retaining bolt

Check Before Replacing

• Disconnect appliance power before opening or servicing the meter case.
• Visually confirm that the coin slide is seated in the meter-case openings and is secured by its retaining bolt.
• With power disconnected, check for visible looseness, missing hardware, damaged threads, or abnormal movement of the coin slide.
• Operate the coin slide manually only as permitted by the appliance and coin-slide manufacturer instructions; verify that it moves freely without binding.
• If the bolt is present and secure but the coin slide still fails to actuate, inspect the slide, actuator, switch, and meter mechanism separately rather than assuming the bolt is defective.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before servicing.
• Remove the meter-case service door according to the appliance installation or service instructions.
• Guide the coin-slide mechanism into the meter-case openings and secure it with the bolt from inside the meter case.
• Confirm that the coin slide moves freely and is properly seated before reinstalling the service door and restoring power.
• Follow the appliance-specific and coin-slide manufacturer's instructions; meter-case access and surrounding hardware can vary by model.

Verified Compatible Models

3CFE2510W1, 3CFE2510W2, 1102011200A, 11020112000, 11020132000, 11020132001, 11020172000, 11076409150, 11076409650, 11077409140, 11077409240, 11077409440, 11077409640, 11077409840, CE2500XMW1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.