Whirlpool Range surface burner knob / range surface control knob, black WP9750372FF, Replaces 9750372FF

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Knob is cracked, damaged, loose, or missing.
• Knob spins without properly turning the control shaft.
• Surface-burner heat cannot be selected or adjusted accurately because the knob or its shaft opening is damaged.
• Knob does not sit correctly on the control shaft.

Check Before Replacing

• Turn all surface controls to Off and allow the cooktop to cool before inspection.
• Gently pull the knob straight away from the control panel and inspect it for cracks, a damaged shaft opening, looseness, or missing pieces.
• Check that the control shaft is present and that the knob’s opening aligns with the shaft’s flat edge; do not force the knob into place.
• After installation, confirm the knob is seated securely and that its indicator aligns with Off before operating the burner.

Pro Tip

Part Details

Installation Notes

• Ensure all controls are Off and the cooktop is cool before removal or installation.
• Remove the old knob by pulling it straight away from the control panel.
• Align the flat edge of the control shaft with the knob opening, then press the replacement knob onto the shaft.
• Set the replacement knob in the Off position and verify that it is seated securely.
• Do not remove any seal beneath the knob if the appliance model uses one.

Verified Compatible Models

KECC051HBL0, KECC051HBL1, KECC051HBL2, KECC051HBL3, KECC051HBL05, KECC051HBT1, KECC051HBT2, KECC051HBT3, KECC051HBT05, KECC051HWH1, KECC051HWH2, KECC051HWH3, KECC051HWH05, KECC056RBL00, KECC056RBL01

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.