Whirlpool Range Door Lock Motor and Switch Assembly WP9760889, Replaces 9760888, 9760889, WP9760888, 9759525, 9759481, 8301268

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Door will not open after a self-cleaning cycle
• Door will not close or latch correctly
• Latch movement is slow, incomplete, or stuck
• Self-cleaning cycle may not proceed if the lock position is not detected

Check Before Replacing

• With power disconnected and the oven fully cool, visually inspect the latch hook and door channel for obstruction, bent parts, or misalignment.
• Check that the oven door closes fully and is not being held away from the frame by debris or a damaged hinge.
• Observe whether the latch motor attempts to move when a self-clean cycle is initiated, without touching moving parts.
• If the door remains locked after cooling, disconnect power and follow the appliance-specific service information rather than forcing the door open.
• Confirm the appliance model before replacing the assembly; symptoms can also result from the door switch, control, wiring, or mechanical alignment.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and allow the oven to cool completely before servicing.
• Use the appliance’s model-specific service information because access and mounting details vary by appliance.
• Disconnect the wiring harness before removing the old assembly and reconnect it securely to the replacement.
• Ensure the latch linkage and hook are correctly aligned and move freely before restoring power.
• Replace all removed panels and verify normal door operation before using self-cleaning.

Verified Compatible Models

GBD277PRB01, GBD277PRB03, GBD277PRQ01, GBD277PRS01, GBD277PRS02, GBD277PRS03, GBD279PVB00, GBD279PVB02, GBD279PVQ00, GBD279PVQ02, GBD279PVS00, GBD279PVS02, GBD307PRB01, GBD307PRB03, GBD307PRS01

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.