Whirlpool Range Coil Surface Element, 8-inch, plug-in, looped/pigtail terminal ends, 4-turn WP9761346, Replaces R0710047, 74003223, 74007159, 9761346, 3196679

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• No heat or insufficient heat
• Intermittent heating
• Uneven or erratic heating
• Element remains cold while the control is on

Check Before Replacing

• Disconnect power to the range at the control or circuit breaker and allow the element to cool completely.
• Confirm that the coil element is fully seated in its receptacle and that the burner-bowl openings align with the receptacle.
• Visually inspect the coil and looped terminals for breaks, scorching, distortion, or corrosion.
• If qualified to use a multimeter, test the disconnected element for continuity; an open circuit indicates the element itself is defective, but a continuity result does not rule out a receptacle, wiring, or control problem.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before removing or installing the element.
• Handle the coil by its supported outer areas and avoid bending the terminals.
• Align the element terminals with the receptacle and seat the element fully before restoring power.
• If the receptacle or wiring shows heat damage, discontinue use and have the related repair evaluated rather than installing the element alone.

Verified Compatible Models

EHT312, EHT330, FEP310GW0, FEP310KN1, FEP310KV4, FEP310KW2, RF260BXSW2, RF303PXKQ4, RF3020XEW0, RME30000, RS610PXHW1, TES325GW0, WDE150LVT01

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.