Agitator Assembly, Flexcare Agitator, Dual-Action Agitator, Top-Load Washer Agitator, Complete Agitator Assembly

W10093672, 1202813, AP6014975, AH1490515, EA1490515, PS1490515, 1155395

Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Crosley, Kenmore, Sears

WhirlpoolWTW5000DW, WTW5000DW0, WTW5000DW1, WTW5000DW2, WTW5100HW, WTW5100HW0, WTW5100HW1, WTW5100HW2, WTW5200VW, WTW5200VW0, WTW5200VW1, WTW5200VW2, WTW5300VW, WTW5300VW0, WTW5300VW1, WTW5300VW2, WTW5400XW, WTW5400XW0, WTW5400XW1, WTW5400XW2

MaytagMVWC300VW, MVWC300VW0, MVWC300VW1, MVWC300VW2, MVWC400VW, MVWC400VW0, MVWC400VW1, MVWC400VW2, MVWC500VW, MVWC500VW0, MVWC500VW1, MVWC500VW2, MVWC600VW, MVWC600VW0, MVWC600VW1, MVWC600VW2

KitchenAidKAWS850LE, KAWS850LE0, KAWS850LE1, KAWS850LE2, KAWS850LW, KAWS850LW0, KAWS850LW1, KAWS850LW2, KAWS900LE, KAWS900LE0, KAWS900LE1, KAWS900LE2

Jenn-AirJAWS850HW, JAWS850HW0, JAWS850HW1, JAWS850HW2, JAWS900HW, JAWS900HW0, JAWS900HW1, JAWS900HW2

AmanaNTW4500VQ, NTW4500VQ0, NTW4500VQ1, NTW4500VQ2, NTW4600VQ, NTW4600VQ0, NTW4600VQ1, NTW4600VQ2, NTW4700VQ, NTW4700VQ0, NTW4700VQ1, NTW4700VQ2

Magic ChefMCWT500VW, MCWT500VW0, MCWT500VW1, MCWT500VW2, MCWT600VW, MCWT600VW0, MCWT600VW1, MCWT600VW2

AdmiralATW500VW, ATW500VW0, ATW500VW1, ATW500VW2, ATW600VW, ATW600VW0, ATW600VW1, ATW600VW2

NorgeNTW500VW, NTW500VW0, NTW500VW1, NTW500VW2, NTW600VW, NTW600VW0, NTW600VW1, NTW600VW2

RoperRTW500VW, RTW500VW0, RTW500VW1, RTW500VW2, RTW600VW, RTW600VW0, RTW600VW1, RTW600VW2

CrosleyCTW500VW, CTW500VW0, CTW500VW1, CTW500VW2, CTW600VW, CTW600VW0, CTW600VW1, CTW600VW2

Kenmore110.27012700, 110.27012701, 110.27012702, 110.27012703, 110.27013700, 110.27013701, 110.27013702, 110.27013703, 110.27014700, 110.27014701, 110.27014702, 110.27014703

Sears110.27012700, 110.27012701, 110.27012702, 110.27012703, 110.27013700, 110.27013701, 110.27013702, 110.27013703, 110.27014700, 110.27014701, 110.27014702, 110.27014703

1. Unplug the washing machine from the wall outlet to ensure complete power disconnection.
2. Turn off the water supply to the washing machine by closing both the hot and cold water valves.
3. Open the washer lid fully to provide access to the agitator.
4. Remove any laundry from the washer tub.
5. Take photos of the old agitator from multiple angles before removal. Document the agitator position and orientation.
6. Locate the agitator cap at the top center of the agitator. This is typically a decorative cap that covers the mounting bolt.
7. Remove the agitator cap by prying it off with a flathead screwdriver or by twisting it counterclockwise (depending on the design). Some caps snap off, while others unscrew. Apply gentle, even pressure to avoid cracking the cap.
8. Locate the agitator mounting bolt underneath the cap. This is typically a 7/16-inch bolt or a similar size.
9. Remove the agitator mounting bolt using a socket wrench or ratchet with the appropriate socket size (typically 7/16-inch). Turn the bolt counterclockwise to loosen and remove it. Keep the bolt in a safe place for reinstallation.
10. Grasp the agitator firmly with both hands on opposite sides of the upper section.
11. Pull the agitator straight up with firm, steady pressure. The agitator should slide off the drive shaft. If the agitator is stuck, rock it gently back and forth while pulling upward to break it free. Do not use excessive force, which can damage the drive shaft or tub.
12. If the agitator is stuck, pour 1-2 cups of hot water around the base of the agitator to help loosen any mineral deposits or detergent buildup. Wait 5-10 minutes, then try pulling again.
13. Remove the old agitator completely from the washer tub and set it aside.
14. Inspect the agitator drive shaft for damage, wear, or corrosion. The drive shaft should be straight, intact, and free of cracks or breaks. If the drive shaft is damaged, it must be replaced before installing the new agitator.
15. Inspect the agitator drive block (the plastic or metal component at the top of the drive shaft that the agitator mounts onto). The drive block should have intact splines or teeth that engage with the agitator. If the drive block is worn or damaged, it must be replaced.
16. Clean the drive shaft and drive block using a damp cloth to remove any detergent residue, mineral deposits, or debris. Ensure the mounting surface is clean and dry.
17. Unpack the new WPW10093672 agitator from its packaging. Handle carefully to avoid damaging the plastic components.
18. Verify the agitator specifications match the old agitator: height approximately 18-22 inches, base diameter approximately 4-6 inches, dual-action Flexcare design with upper and lower sections.
19. Compare the new agitator to the old one to verify the dimensions, mounting hole, and overall appearance match. Ensure you have the correct replacement part.
20. Inspect the new agitator for any damage or defects before installation. The agitator should be intact with no visible cracks, breaks, or missing components.
21. Align the new agitator with the drive shaft. The agitator base has internal splines or teeth that must align with the drive block splines.
22. Push the agitator straight down onto the drive shaft with firm, steady pressure. The agitator should slide down smoothly and seat fully on the drive block. You may need to rotate the agitator slightly to align the splines.
23. Verify the agitator is fully seated by checking that the base of the agitator is flush with the bottom of the washer tub. There should be no gap between the agitator base and the tub bottom.
24. Install the agitator mounting bolt by inserting it through the center hole at the top of the agitator and threading it into the drive shaft. Turn the bolt clockwise to tighten.
25. Tighten the mounting bolt using a socket wrench or ratchet. Tighten firmly but do not overtighten, which can strip the threads or crack the agitator. The bolt should be snug and secure.
26. Reinstall the agitator cap by snapping it into place or threading it clockwise (depending on the design). Ensure the cap is fully seated and secure.
27. Test the agitator by grasping it firmly and attempting to pull it upward. The agitator should not move or come off the drive shaft. It should be firmly secured.
28. Restore the water supply by opening both the hot and cold water valves.
29. Plug in the washing machine to restore power.
30. Run a test wash cycle using a small load of laundry. Select a normal wash cycle with warm water.
31. Observe the agitator during the wash cycle. The agitator should rotate back and forth smoothly without wobbling, grinding, or making unusual noises.
32. Verify the upper agitator section rotates independently from the lower section during the wash cycle. This dual-action motion is normal for Flexcare agitators.
33. Check for leaks around the agitator base during the wash cycle. There should be no water leaking from the drive shaft area.
34. Monitor the wash cycle to completion to verify the agitator operates properly throughout the entire cycle.
35. Inspect the cleaned laundry after the cycle completes. Clothes should be clean and free of tangling or damage.

Safety Notes: Always unplug the washing machine and turn off the water supply before working on it to prevent electrical shock and water damage. Handle plastic components carefully to avoid cracking or breaking them. Ensure the agitator is fully seated and securely bolted before operating the washer. This repair is straightforward and can be completed by most homeowners with basic tools and careful attention to detail.

1. Document the agitator connection with detailed photos before removal. Take high-quality photos of the agitator cap/bolt, the agitator shaft connection, and the relationship to the wash tub from multiple angles. Capture the spline pattern, any washers or seals, and the exact orientation of the agitator. This documentation is critical for ensuring correct reinstallation and avoiding mistakes.
2. Verify the transmission shaft splines are intact and undamaged before installing the new agitator. Inspect the transmission shaft inside the wash tub for worn, stripped, or damaged splines. Worn splines will prevent the new agitator from engaging properly and will cause the same symptoms as a failed agitator. If the shaft splines are damaged, the shaft may need replacement.
3. Clean the transmission shaft thoroughly before installing the new agitator. Remove any lint, debris, corrosion, or residue from the transmission shaft and spline connection area. A clean shaft ensures proper spline engagement and prevents premature wear on the new agitator.
4. Align the agitator splines with the transmission shaft splines before pushing down. Carefully align the agitator shaft splines with the transmission shaft splines. Forcing a misaligned agitator onto the shaft can damage both the agitator and the transmission shaft. The agitator should slide onto the shaft smoothly once properly aligned.
5. Use steady, firm pressure when installing the new agitator onto the transmission shaft. Push the agitator straight down onto the shaft with consistent pressure. The agitator should slide onto the shaft with moderate resistance as the splines engage. Do not jerk or twist the agitator during installation, which can damage the splines.
6. The agitator must be fully seated on the transmission shaft before operating the washer. An improperly seated agitator will wobble, move off-center, or slip during operation. Verify the agitator is flush with the top of the wash tub and cannot be pulled upward before reinstalling the cap or bolt.
7. Inspect the agitator cap or retaining bolt for damage or corrosion before reinstalling. The cap or bolt must be intact and undamaged to properly secure the agitator. A damaged cap or bolt may not hold the agitator securely, causing it to shift during operation.
8. Tighten the agitator cap or retaining bolt firmly but do not overtighten. Excessive tightening can crack the agitator or strip the bolt threads. Tighten until snug, then add approximately 1/4 turn for final tightening. The cap or bolt should be secure but not excessively tight.
9. Test the agitator rotation immediately after installation to verify proper operation. Set the washer to a short wash cycle and observe the agitator rotation through the lid. The agitator should rotate back and forth smoothly without wobbling, off-center movement, or grinding sounds. Smooth operation indicates proper agitator installation and transmission shaft engagement.
10. This repair is cost-effective compared to washer replacement. The cost of agitator replacement ($35-75) is far less than the cost of a new washer ($800-2,000+). Replace the agitator promptly when failure is detected to prevent the need for expensive washer replacement and to restore effective laundry cleaning performance.