CRACKED OR SLIPPING KNOB PREVENTS RELIABLE TIMER SELECTION
Whirlpool Corporation Dryer Timer Knob Assembly WPW10110030, Fixes Cracked or slipping knob prevents reliable timer selection
White dryer timer knob assembly used on selected Whirlpool-family residential dryers. WPW10110030 is the current OEM replacement for W10110030.
Part WPW10110030Replaces W10110030Whirlpool Corporation
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWPW10110030
ReplacesW10110030
ManufacturerWhirlpool Corporation
Appliance TypeDryer
Part TypeTimer Knob Assembly
✅ Cross Reference Information
Current Part NumberWPW10110030
ReplacesW10110030
Common Symptoms
- Knob spins without turning the timer shaft
- Knob is cracked, loose, or broken
- Cycle indicator does not remain aligned with the selected setting
- Knob will not engage the timer shaft during normal operation
Check Before Replacing
- With the dryer stopped, inspect the knob for cracks, missing sections, or a visibly damaged shaft opening.
- Gently rotate the knob and confirm that the timer shaft turns with it; do not force the control.
- Compare the knob indicator position with the selected cycle marking to check for slipping or misalignment.
- If the knob appears intact but the shaft does not respond, avoid assuming the knob is the failed component; the timer or shaft may require separate diagnosis.
Pro Tip
Do not force a resistant knob. Excessive force can damage the knob, timer shaft, or console; verify that the replacement matches the original knob orientation and shaft interface.
Part Details
Part NumberWPW10110030
Part TypeTimer Knob Assembly
ManufacturerWhirlpool Corporation
Appliance TypeDryer
Primary FunctionTransfers the user's selected dryer-cycle setting to the dryer's mechanical timer shaft so the timer can be positioned and operated.
Installation Notes
- Disconnect power before servicing the dryer.
- The knob is removed from the timer shaft by pulling it away from the console; use only gentle, even force.
- Align the replacement knob with the timer shaft and push it fully into place without forcing it.
- If the knob cannot be removed normally, access to the rear of the console may be needed; follow the appliance-specific service documentation.
Verified Compatible Models
4KMED5700TQ0, 4KMED5700TQ1, 7MMGD6630TM0, 7MMGD6630TM1, 7MMGD6630TQ0, 7MMGD6630TQ1, MED5570TQ0, MED5591TQ0, MED5600TQ0, MED5600TQ1, MED5620TQ0, MED5620TQ1, MED5621TQ0, MED5630TQ0, MED5630TQ1
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
