Whirlpool Washer timer/control knob assembly, gray/silver WPW10110033, Replaces W10110033, W10112570, Fixes Cracked, stripped, or loose knob that slips on the control shaft and prevents reliable cycle selection
Genuine Whirlpool OEM timer knob assembly used to control cycle selection. The knob mounts to the control shaft and is described as gray with silver detail. Documented fitment also includes certain Maytag/Whirlpool laundry-center models, but the primary appliance category is washer.
Genuine Whirlpool OEM timer knob assembly used to control cycle selection. The knob mounts to the control shaft and is described as gray with silver detail. Documented fitment also includes certain Maytag/Whirlpool laundry-center models, but the primary appliance category is washer.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Cycle selection will not set correctly
- Washer controls may not respond when the knob is turned
- Knob rotates without properly engaging the selector shaft
- Washer may not start if the knob cannot actuate the control properly
Check Before Replacing
- With the washer unplugged, visually inspect the knob for cracks, splitting, or a stripped center opening.
- With power disconnected, gently turn the knob and observe whether it engages the control shaft or slips independently.
- Check that the control shaft is present, centered, and not visibly damaged before ordering the knob.
- Confirm the replacement knob’s shape, color, and shaft interface against the original part and the appliance model.
Pro Tip
Part Details
Key Features
- Genuine Whirlpool OEM part
- Gray or grey finish with silver detail
- Timer/control knob assembly
- Mounts to the washer control-panel rotary or starter-switch post
- Used for manual cycle selection
- Also used on certain Maytag and Whirlpool laundry appliances
Installation Notes
- Disconnect electrical power before removing or installing the knob.
- Remove the old knob by pulling it straight off its post; if the knob is broken, remove any remaining pieces without damaging the control shaft.
- Align the replacement knob with the control shaft and press it into place without forcing it.
- Verify that the knob turns the shaft smoothly and that cycle markings align normally before restoring power.
Verified Compatible Models
2DMTW5705TW0, 2DMTW5705TW1, 3UMTW5755TW0, 3UMTW5755TW1, 3UMTW5955TW0, 3UMTW5955TW1, 4KMTW5755TW0, 4KMTW5755TW1, 4KMTW5955TW0, 4KMTW5955TW1, 6AMTW5405TQ0, 6AMTW5455TQ0, 6AMTW5455TQ1, 6AMTW5555TQ0, 6AMTW5555TQ1
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
