Whirlpool Corporation Dryer drum drive belt WPW10112954, Replaces W10112954

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Drum does not spin while the motor may run
• Squealing, thumping, or other belt-related noise
• Drum turns unusually easily by hand when the belt is broken
• Dryer may stop tumbling during a cycle

Check Before Replacing

• Disconnect power before inspection or service.
• With the dryer off, rotate the drum by hand and note whether it turns unusually freely; this can indicate a broken or detached belt but does not by itself confirm the diagnosis.
• If safely accessible for the specific dryer model, visually inspect the belt for breakage, fraying, glazing, stretching, or displacement from the drum and pulleys.
• Confirm that the drum, motor pulley, and idler pulley are compatible with the dryer’s model-specific service information before replacing the belt.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before servicing; shut off the gas supply as applicable for a gas dryer.
• Use the dryer’s model-specific service documentation for access-panel removal and the exact belt-routing path.
• Install the belt around the drum and route it through the idler and motor pulleys as specified for the model; keep the belt aligned and untwisted.
• Before reassembly, check that the drum rotates smoothly and that the belt tracks correctly on the drum and pulleys.

Verified Compatible Models

4KMEDC300BW0, 7MMGD0100TQ1, MED7000AG0, MED7000AW0, MED8000AG0, MGD5500FC0, MGD8100DC1, MGD8200FW1, MGDC700VJ0, MGDE500WJ1, MGDE900VJ2, WED7590FW0, WED7590FW1, YMED8200FW0, YMEDX500XL0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.