Whirlpool Refrigerator Ice Maker Assembly WPW10122559, Replaces W10122559

OEM refrigerator ice maker assembly containing the complete ice maker and housing. It is used in Whirlpool, KitchenAid, and Maytag refrigerator applications.

Is This the Right Part?

Common Symptoms

• No ice production
• Ice maker overflowing or overfilling
• Frost or ice buildup around the ice maker
• Dirty or stale-tasting ice
• Unusual ice-maker noise
• Water leakage associated with the ice-maker area

Check Before Replacing

• Confirm the ice maker is switched on and that the shutoff/bail arm is in the operating position.
• Verify that the refrigerator water supply valve is open and that the water dispenser has normal flow; restricted water flow can prevent proper ice-maker filling.
• Check that the freezer is cold enough for ice production and allow up to approximately 24 hours after activation or service for production to begin.
• Observe a complete cycle only if the appliance’s model-specific instructions permit it: the ejector should move and water should enter near the end of the cycle.
• If the mold is empty, check the water-supply path before concluding that the ice-maker assembly itself has failed.
• Disconnect appliance power and water supply before removing or replacing the assembly; avoid testing exposed live electrical terminals.

Pro Tip

Part Details

Key Features

• Whirlpool genuine OEM ice-maker assembly
• Complete assembly supplied with the ice-maker and housing
• Designed for selected Whirlpool, KitchenAid, and Maytag refrigerators
• Replaces previous part number W10122559
• Exact requested part number: WPW10122559

Installation Notes

• Use the model-specific refrigerator service or installation instructions because mounting and wiring access can vary by refrigerator configuration.
• Turn off appliance power before disconnecting the ice-maker assembly and protect the water supply from leaks.
• Confirm that the replacement assembly’s electrical connector and physical configuration match the removed assembly before installation.
• After installation, place the ice maker in the operating position and verify ejector movement and water filling only according to the applicable model instructions.
• Allow approximately 24 hours for normal ice production after installation or activation.

Verified Compatible Models

GI7FVCXWA00, GI7FVCXWA01, GI7FVCXWA03, GI7FVCXWB00, GI7FVCXWB01, GI7FVCXWB03, GI7FVCXWQ00, GI7FVCXWQ01, GI7FVCXWQ03, GI7FVCXWY00, GI7FVCXWY01, GI7FVCXWY02, GI7FVCXWY03, GI7FVCXWY05, GI7FVCXXA00

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.