Whirlpool Washer Water inlet valve with vacuum break (IVVB assembly) WPW10140917, Replaces W10140917

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Washer does not fill with hot or cold water
• Washer fills slowly
• Water continues entering the washer when it is not in use
• Washer overfills
• Water inlet valve or hose connection leaks
• Washer receives water at the wrong temperature

Check Before Replacing

• Confirm both household water supply valves are fully open.
• Inspect the hot and cold inlet hoses for kinks or restricted flow.
• Check that the washer has adequate household water pressure.
• With power disconnected and water supply shut off, inspect the valve inlet screens for visible debris; do not remove or damage the screens.
• If safe access is available for the specific washer model, compare the valve’s hot- and cold-side operation during a fill cycle using the model’s service procedure; avoid live-voltage testing unless performed by a qualified technician.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the washer’s water supply before servicing.
• Relieve residual hose pressure and protect against water spillage when disconnecting the inlet hoses.
• Reconnect the hot and cold hoses and electrical connectors to the correct locations for the washer model.
• Inspect hose connections for leaks after installation before returning the washer to normal use.
• Use the appliance-specific service or repair instructions because access and retaining hardware vary by washer model.

Verified Compatible Models

1CWTW5100VQ1, CAWS9234VQ0, ETW4400VQ3, ITW4300SQ3, IV4500X0, IV45001, NTW4500VQ1, WTW5100VQ1, WTW5100VQ2, WTW5300SQ2

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.