Whirlpool Pump, Drain-Complete Assembly / Washer Drain Pump WPW10175948, Replaces W10175948

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Standing water remains in the tub or washer stops before cycle completion.
• Unusual noise during draining may occur if the pump is obstructed or damaged.
• Water leakage may occur if the pump or its connections are damaged; this symptom is not conclusive by itself.

Check Before Replacing

• Disconnect electrical power before inspecting the pump or its wiring.
• Check the drain hose and accessible pump area for kinks, lint, coins, or other foreign-object obstructions.
• Visually inspect the pump wiring connector and harness for looseness or visible damage.
• If the washer’s model-specific technical sheet provides a drain-pump diagnostic test, run that test only according to the sheet’s instructions; do not treat a failed-drain symptom alone as proof that the pump is defective.

Pro Tip

Part Details

Installation Notes

• Unplug the washer or disconnect its circuit-breaker power before installation.
• Wear work gloves when handling the pump and washer panels.
• Turn off the hot and cold water supplies before beginning installation, as recommended for this part.
• Installation requires access to the washer’s pump area and some appliance disassembly; follow the appliance-specific service information and preserve the original hose and electrical-connection arrangement.
• Verify that the replacement assembly matches the original connector, hose connections, and mounting arrangement before final reassembly.

Verified Compatible Models

IFW7200TW10, NFW7200TW10, NFW7200TW11

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.