WASHER WILL NOT DRAIN
Whirlpool Washer Drain Pump Assembly WPW10241025, Fixes Washer will not drain
Front-load washer water drain pump assembly with coin trap/filter and housing; includes the pump motor, which is not separately available.
Part WPW10241025Replaces W10241025Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWPW10241025
ReplacesW10241025
ManufacturerWhirlpool
Appliance TypeWasher
Part TypeDrain Pump Assembly
✅ Cross Reference Information
Current Part NumberWPW10241025
ReplacesW10241025
Common Symptoms
- Water remains in the washer after the drain cycle.
- Drainage is unusually slow or incomplete.
- Humming or grinding noise occurs while the washer is attempting to drain.
- The pump area or connected hose shows a leak.
Check Before Replacing
- Disconnect electrical power before inspection.
- Check the washer’s drain hose for kinks, restrictions, or improper routing.
- If the model provides access, inspect and clean the pump filter or coin trap for lint, coins, or other debris.
- With power disconnected, inspect accessible pump hoses and the pump housing for blockage, cracks, or loose connections.
- If the pump is unobstructed but the washer still does not drain, use the model-specific service information or qualified service support rather than assuming the pump is defective.
Pro Tip
Check the drain hose and pump filter or coin trap for restrictions before replacing the pump; a blockage can produce the same no-drain symptom as a failed pump.
Part Details
Part NumberWPW10241025
Part TypeDrain Pump Assembly
ManufacturerWhirlpool
Appliance TypeWasher
Primary FunctionPumps wastewater from the front-load washer tub through the drain hose during the drain portion of the cycle.
Installation Notes
- Disconnect electrical power before installation.
- Drain or capture residual water before disconnecting pump hoses.
- Wear work gloves when handling the washer and pump assembly.
- Use the appliance-specific service information for access-panel removal and pump mounting details because access varies by model.
- Reconnect the pump hoses and electrical connector securely, then check for leaks and proper draining during a short test cycle.
Verified Compatible Models
WFW94HEXL0, WFW94HEXL1, WFW94HEXL2, WFW94HEXR0, WFW94HEXR1, WFW94HEXR2, WFW94HEXW0, WFW94HEXW1, WFW94HEXW2, WFW95HEXL0, WFW95HEXL1, WFW95HEXL2, WFW95HEXR0, WFW95HEXR1, WFW95HEXR2, WFW95HEXW0, WFW95HEXW1, WFW95HEXW2, WFW97HEXL0, WFW97HEXL1, WFW97HEXL2, WFW97HEXR0, WFW97HEXR1, WFW97HEXR2, WFW97HEXW0, WFW97HEXW1, WFW97HEXW2
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
