Whirlpool Suspension Spring / Washer Tub Counterbalance Spring WPW10250667, Replaces W10250667, 63207, 62738, 388492

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Excessive shaking or washer movement during spin
• Tub or basket movement accompanied by banging or unusual noise
• Visible tub lean caused by a broken, detached, or weakened counterbalance spring

Check Before Replacing

• Unplug the washer before inspection.
• With the cabinet or access area opened according to the appliance’s service instructions, visually check whether the spring is broken, detached, stretched, corroded, or missing.
• Check that the spring hooks and their mounting points are seated securely and are not damaged.
• Observe whether the tub is centered and level when the washer is empty; do not assume the spring is the sole cause of vibration if it appears intact.
• Confirm the exact washer model before ordering or installing the part.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before servicing.
• Access requirements and cabinet-removal steps vary by washer model; follow the model-specific service instructions.
• Before removing the old spring, note the hook orientation and mounting locations.
• Remove and install the spring only from a stable, accessible position; avoid placing hands in the spring path while it is under tension.
• After installation, verify that the spring is fully seated at both mounting points and that the tub sits centered before reassembling the washer.
• Reassemble all removed cabinet or access components before restoring power and testing.

Verified Compatible Models

2DMTW5705TW1, 3RMTW4905TW2, 3UMTW5755TW1, 3UMTW5955TW1, 4KMTW5755TW1, 4KMTW5955TW1, 6AMTW5555TQ1, 7MWET3300EQ1, CAM2752TQ3, LTG5243DQA, MGT3800XW1, MVWC7ESWW0, WET3300XQ1, WGT4027EW1, YMET3800XW0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.