Whirlpool Dishwasher Dishrack Adjuster Cover WPW10251047, Replaces W10251047

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Cracked or missing adjuster cover
• Upper rack becomes loose, tilted, or misaligned
• Rack height adjustment is difficult or does not hold properly
• Adjuster latch or mechanism is exposed

Check Before Replacing

• With the dishwasher unloaded and the upper rack pulled out, visually inspect the adjuster cover for cracks, missing sections, or separation from the adjuster body.
• Check that the cover is seated and retained on the adjuster body; do not force it if the rack mechanism is damaged.
• Move the upper rack through its normal height-adjustment positions by hand and check for smooth, even movement on both sides.
• If the rack remains loose or misaligned with an intact cover, inspect the associated adjuster assembly and rack hardware because the cover alone may not be the cause.

Pro Tip

Part Details

Installation Notes

• Unload the upper rack and pull it out for access to the affected adjuster.
• Inspect the adjuster body before installation and do not install the cover if the supporting mechanism is broken or unstable.
• Align the cover with the adjuster body and seat its retaining tabs or clips without forcing them.
• After installation, operate the rack height adjustment by hand and verify that the cover remains seated and the rack moves evenly.
• Follow the appliance service documentation for any required power or water-supply precautions before servicing.

Verified Compatible Models

MDB6949SDH0, MDB7949SDM0, MDB7949SDM1, MDB7949SDM2, MDB7959SHZ1, MDB8859AWW3, MDB8949SBM2, MDB8949SBW0, MDB8959AWB4, MDB8959AWB6, MDB8959SFE1, MDB8969SDE0, MDB8969SDE2, MDB8969SDM0, MDB8969SDM2

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.