Whirlpool Dishwasher Pump and Motor Assembly WPW10418332, Replaces W10195599, W10328225, W10418331, W10418332, WPW10195599, WPW10328225, WPW10418331

Genuine Whirlpool OEM dishwasher pump and motor assembly that circulates wash water through the spray arms during the dishwashing cycle.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dishwasher makes unusual humming, droning, grinding, or scraping noises during washing
• Dishes are not cleaned effectively or spray arms barely rotate
• Dishwasher may not drain correctly when the shared pump/motor system is affected
• Water may leak from the pump or motor area
• Dishwasher may stop mid-cycle or fail to start if the assembly is seized or electrically failed

Check Before Replacing

• Disconnect electrical power before inspecting the pump area.
• With power disconnected, check the sump and pump inlet for visible food debris or foreign objects that could obstruct the impeller.
• After confirming the dishwasher is empty and safe to operate, observe whether the spray arms receive water circulation during the wash portion of a cycle.
• Inspect the pump and motor area for visible leakage, damaged housing, or signs of overheating; do not disassemble the motor or apply power during inspection.
• Verify that the spray arms can rotate freely and that filters are clean before attributing poor cleaning to the pump and motor assembly.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM pump and motor assembly
• Combined pump-and-motor design for dishwasher water circulation
• Moves water from the sump through the spray arms
• Used across select Whirlpool, KitchenAid, Kenmore, and JennAir dishwasher applications
• The assembly may address circulation and draining problems on models using a shared pump/motor system

Installation Notes

• Disconnect electrical power and water connections before accessing or replacing the assembly.
• Installation is model-specific; confirm the dishwasher model and replacement-part fit before beginning.
• During installation, inspect the pump and sump sealing area and ensure the assembly is properly seated to prevent leaks.
• Reconnect the electrical connector and drain-hose connection only as specified for the appliance model.
• After reassembly, restore power and check for leaks during a test cycle before returning the dishwasher to normal use.

Verified Compatible Models

665.13922K010, 665.13929K013, JDB8700AWP0, KUDE20FXSS3, KUDE20FXWH4, KUDE20IXBL0, KUDE20IXBL2, KUDE20IXBL4, KUDE20IXWH4, KUDE20IXWH6, KUDE20IXWH8, KUDL15FXBL0, KUDL15FXBL3, KUDL15FXBL5, KUDL15FXSS2

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.