Whirlpool Washer drain pump assembly WPW10465252, Replaces W10465252, W10192988

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Water remains in the washer after the drain or spin portion of the cycle.
• Pump runs or hums but little or no water is discharged.
• Abnormal noise during draining may occur if debris reaches the pump impeller.
• Leakage near the pump area may occur if a hose connection or pump housing is damaged.

Check Before Replacing

• Unplug the washer before inspection or service.
• Check the drain hose for kinks, crushing, or visible obstruction before condemning the pump.
• Inspect accessible pump and hose connections for foreign objects or loose connections, following the washer's service information.
• During a drain or drain/spin cycle, listen for pump operation; a humming pump with retained water can indicate an obstruction or pump problem, but does not by itself confirm pump failure.
• If leakage is reported, inspect the pump housing and nearby hose connections for visible cracks, damage, or looseness.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before installation and wear work gloves for hand protection.
• Verify the appliance model and part number before ordering or installing, because pump assemblies can have visually similar variations.
• Installation requires access to the washer's pump assembly and reconnection of the existing hose and electrical connections; follow the model-specific service instructions.
• After installation, run an appropriate drain or drain/spin test and check the pump area for leaks before returning the washer to normal use.

Verified Compatible Models

MHWC7500YW0, WFC7500VW0, WFC7500VW1, WFC7500VW2

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.