Whirlpool Range Valve and Pressure Regulator / Oven Gas Valve WPW10546238, Replaces W10546238

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Oven does not heat
• Oven broiler does not heat
• Oven starts heating but fails to relight and maintain temperature
• Bake or broil burner receives no gas despite an operating ignition system

Check Before Replacing

• Confirm the range has gas service and that the oven regulator shut-off lever is in the ON position; Whirlpool notes that an OFF regulator shut-off can allow cooktop burners to operate while preventing oven gas flow.
• When the oven is calling for heat, observe whether the igniter operates and whether the bake or broil burner ignites; lack of ignition can also result from an igniter, orifice, wiring, or control problem.
• Do not replace the valve based on symptoms alone; verify the appliance-specific service information and have a qualified appliance technician perform gas-pressure, leak, and electrical checks when required.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the range gas supply before servicing.
• Use the appliance-specific service documentation and confirm the replacement matches the exact model and gas configuration.
• After reconnection, all disturbed gas connections must be checked for leaks using an appropriate method; do not operate the range if a leak is suspected.
• Because this is a gas-control component, qualified service is recommended when the installer is not experienced with gas appliances.

Verified Compatible Models

IGS900DS00, IGS900DS01, IGS900DS02, IGS900DS04, IGS900DS05, KFGD500EBL00, KFGD500EBS00, KFGD500EBS05, KFGD500ESS00, KFGD500ESS01, KFGD500EWH00, KFGD500EWH01, KFGD500EWH02, KFGD500EWH03, KGRS505XSS05

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.