UPPER DISHRACK WILL NOT ADJUST PROPERLY OR IS UNSTABLE ON THE LEFT SIDE
Whirlpool Dishwasher Adjuster Housing - Left Hand / Left Side Rack Adjuster Housing WPW10588164, Fixes Upper dishrack will not adjust properly or is unstable on the left side
Gray plastic left-hand housing for the dishwasher upper dishrack adjuster. It clips into the upper dish rack and allows rack-height adjustment; sold individually.
Part WPW10588164Replaces W10320664, W10418315, W10588164, WPW10320664Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWPW10588164
ReplacesW10320664, W10418315, W10588164, WPW10320664
ManufacturerWhirlpool
Appliance TypeDishwasher
Part TypeAdjuster Housing - Left Hand / Left Side Rack Adjuster Housing
✅ Cross Reference Information
Current Part NumberWPW10588164
ReplacesW10320664, W10418315, W10588164, WPW10320664
Common Symptoms
- Upper dishrack is loose, sagging, or poorly supported on the left side.
- Upper dishrack height adjustment does not hold or operates incorrectly.
- Rack alignment is uneven, which may interfere with door closing.
- Visible cracking or breakage at the left adjuster housing or its retaining tabs.
Check Before Replacing
- With the dishwasher empty and the upper rack pulled out, visually inspect the left adjuster housing for cracks, broken tabs, or separation.
- Gently move the upper rack side-to-side and compare left-side stability with the right side; excessive looseness can indicate a damaged housing or related adjuster component.
- Operate the upper-rack height adjustment gently and confirm that the left-side housing remains attached and aligned.
- Check that the housing is installed on the left side and that the related adjuster, cover, and wheel assembly are seated correctly before condemning the housing.
Pro Tip
This is the left-side housing only; compare it with the right-side housing before ordering, and retain compatible adjuster and wheel components if the replacement housing is supplied by itself.
Part Details
Part NumberWPW10588164
Part TypeAdjuster Housing - Left Hand / Left Side Rack Adjuster Housing
ManufacturerWhirlpool
Appliance TypeDishwasher
Primary FunctionSupports the dishwasher upper dishrack’s left-side adjuster and wheel assembly, allowing the rack to remain aligned and be raised or lowered.
Installation Notes
- Pull the upper dishrack out to access the adjuster housing.
- Release the adjuster housing cover by depressing its retaining tabs; use care to avoid damaging the rack or cover.
- Remove the damaged housing, align the replacement housing with the adjuster slot, and secure the cover so it snaps into place.
- Use the appliance’s model-specific service information if the adjuster assembly differs; this part may require transferring compatible existing adjuster or wheel components.
- Confirm that the upper rack moves smoothly and remains supported before returning the dishwasher to service.
Verified Compatible Models
66514763N510, 66514793N512, 66514815N612, BLB14BRANA0, BLB14DRANA0, BLB14DRANA1, BLB14DRANA2, BLB14DRANA4, BLB14DRANA5, BLB14FRANA0, GLB14BBANA0, GLB14BBANA1, IDT930SAGX0, JDB8200AWP0, JDB8200AWP1
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
