Whirlpool Washer Washing machine drain pump assembly WPW10661045, Replaces W10661045, W10215134, W10614033

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Water remains in the tub after the cycle
• Slow or incomplete draining
• Unusual humming, grinding, or other noise during draining
• Water leakage near the pump area
• Washer may stop during a cycle when draining is required

Check Before Replacing

• Disconnect power before servicing and check whether the external drain hose is kinked or obstructed.
• With power disconnected, inspect accessible pump hoses and connections for visible leaks, cracks, loose clamps, or obstructions.
• If the pump is accessed, check for foreign objects obstructing the pump or impeller; do not assume the pump is defective until other drain-path causes are excluded.
• After installation, run an appropriate test cycle and check that the washer drains normally and that hose and pump connections remain leak-free.

Pro Tip

Part Details

Installation Notes

• Unplug the washer and shut off the water supply before servicing.
• Be prepared for residual water when disconnecting hoses.
• Access the pump from the bottom area of the washer according to the applicable model’s service instructions.
• Transfer the hose connections and electrical connector to the replacement pump only after confirming their original routing and secure attachment.
• Secure the pump and hose connections, restore the washer to its upright position, then check operation and inspect for leaks.

Verified Compatible Models

11022342510, 11022532510, 11026112310, CAW8350EW1, MVWC215EW1, NTW4516FW0, NTW4651BQ1, NTW4655EW0, WTW4616FW2, WTW4815EW0, WTW4815EW1, WTW4816FW0, WTW4816FW1, WTW4915EW1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.