Whirlpool Refrigerator Main Control Board WPW10675033
Whirlpool genuine OEM electronic main control board for refrigerators. The board regulates refrigerator temperature-related functions and defrost operation.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Your refrigerator powers on — interior lights work and display is active
- ✔ The compressor, fans, or defrost system are not running or behaving erratically
- ✔ Power supply to the unit is confirmed stable (no tripped breaker or surge damage)
- ✔ Temperature sensors and thermistors have been confirmed functional
- ✔ ONLY problem is loss of cooling, compressor control, or erratic system behavior
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Refrigerator not cooling — both fridge and freezer sections warm
- Compressor won't start or runs constantly without cycling off
- Ice maker stopped working completely
- Defrost system not running — heavy frost buildup on evaporator coils
- Temperature display showing error codes or incorrect readings
- Fans running but no cooling — compressor not engaging
✔ If these symptoms match, the electronic control board is the most likely failed component.
✔ In most cases, replacing this board restores full refrigerator operation immediately.
✅ Cross Reference Information
Part Number: WPW10675033
Previous Part Numbers: W10675033, W10811365, W10852119
Part Details
- Part Number: WPW10675033
- Part Type: Main Control Board
- Manufacturer: Whirlpool
- Appliance Type: Refrigerator
⚙️ Installation
Skill Level: Moderate — 30–45 min. Unplug the refrigerator before beginning. Access the control board by removing the rear lower panel or the panel inside the refrigerator compartment (model-dependent). Photograph all wire harness connector positions before disconnecting. Transfer connectors one-at-a-time to the new board to avoid mis-wiring. Handle the board by its edges only to prevent ESD damage. Restore power and allow 24 hours for the refrigerator to reach set temperature before evaluating performance.
💡 Pro Tip
Most Whirlpool and KitchenAid refrigerators have a built-in diagnostic mode accessible by pressing specific button sequences on the control panel — check your model's service manual for the sequence. Diagnostic mode will display fault codes that pinpoint whether the board, a sensor, or another component is the root cause. This 5-minute step can save you from replacing the wrong part.
KRMF606 Series Repair Hub, KRMF706 Series Repair Hub, WRV976 Series Repair Hub, WRV986 Series Repair Hub, WRV996 Series Repair Hub
Verified Compatible Models
KRMF606ESS00, KRMF606ESS01, KRMF706EBS00, KRMF706EBS01, KRMF706EBS04, KRMF706EBS05, KRMF706ESS00, KRMF706ESS01, KRMF706ESS02, KRMF706ESS04, KRMF706ESS05, WRV976FDEM00, WRV976FDEM01, WRV986FDEM00, WRV986FDEM01
Fitment reminder: Match the complete appliance model number before ordering.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
