Microwave Not Heating? Magnetron WPW10693025 – Fix No-Heat & Weak Heating Fast

A failed magnetron is the most common reason a microwave runs, turns, and lights up — but produces no heat whatsoever. In most Whirlpool-platform over-the-range and countertop microwaves, the magnetron is the core component that generates the microwave energy used to heat food. When it fails, the microwave appears fully functional but food comes out cold after a full cycle. ⚡ High-failure component in Whirlpool, Maytag, Amana, and Inglis microwaves — especially in units over 5 years old. Part WPW10693025 is the genuine OEM replacement that restores full microwave heating power and gets your appliance back to normal operation.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Microwave powers on, turntable spins, and interior light works
• ✔ Control panel and timer function normally
• ✔ Door switches have been tested and are functioning
• ✔ ONLY problem is food is not heated — microwave runs but produces no heat

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Microwave runs but food comes out completely cold
• Microwave heats very weakly or inconsistently
• Microwave makes a humming noise but produces no heat
• Microwave trips the breaker or blows a fuse when heating
• Burning smell from inside the microwave during operation

✔ If these symptoms match, the magnetron is the most likely failed component — it is the primary heat-generating element in the microwave.

✔ In most cases, replacing this magnetron restores full heating performance immediately.

📦 Part Details

• Part Number: WPW10693025
• Type: Microwave Magnetron — the high-voltage component that converts electrical energy into microwave radiation to heat food
• Replaces: W10693025, AP6022492, PS11755837, EAP11755837
• Brands: Whirlpool, Maytag, Amana, Inglis, KitchenAid, JennAir

⚙️ Installation

Skill Level: ADVANCED — 45–90 minutes. High-voltage risk — discharge the capacitor before touching any components. Disconnect power and allow the microwave to sit unplugged for at least 30 minutes before servicing. Remove the outer cabinet, discharge the high-voltage capacitor using an insulated resistor, disconnect the magnetron's filament leads and high-voltage connector, remove the mounting bolts, and swap the magnetron. Reassemble and test. This repair involves lethal voltages — if you are not experienced with high-voltage appliance repair, professional installation is strongly recommended.

✓ Compatible Models

Confirmed compatible with AMV1150VAB5, AMV1150VAS5, AMV1150VAW5, AMV2307PFB0, AMV2307PFS0, AMV2307PFW0, AMV6507RGS0, IMH160DW1, IMH160FW0, IMH172DS1, IMH172FS0, IMH205FS0, MMV1164WB6, MMV1164WS7, MMV1174DE1, MMV1174DS1, MMV1174FB0, MMV1174FS0, MMV1174FW0, UMV1160CB2, UMV1160CS2, UMV1160FB0, UMV1160FS0, WMH31017AB2, WMH31017AS2, WMH31017AW2, WMH31017FB0, WMH31017FS0, WMH31017FW0, WMH31017HB5, WMH31017HS5, WMH31017HW5, WMH32519CB1, WMH32519CS1, WMH32519FB0, WMH32519FS0, WMH32519FW0, WMH32519HB0, WMH32519HT0, WMH32519HV0, WMH32519HW0, WMH32519HZ0, YAMV1160VAB7, YAMV2307PFS0, YMMV1174DS0, YMMV1174FZ0, YMMV1174HK0, YWMH31017AB2, YWMH31017AS2, YWMH31017FB0, YWMH31017FS0, YWMH31017FW0, YWMH31017HB0, YWMH31017HS0, YWMH31017HW0, YWMH32519HB0, YWMH32519HT0, YWMH32519HV0, YWMH32519HW0, YWMH32519HZ0 plus additional Whirlpool-platform models. Contact us to verify your model number before ordering.

💡 Pro Tip

✓ Model-Specific Repair Pages