DISHWASHER FILLS BUT SPRAY-ARM WATER CIRCULATION IS WEAK OR ABSENT
Whirlpool Dishwasher Circulation Pump Motor and Impeller Assembly WPW10757216, Replaces W10757216, W10231537, W10231538, Fixes Dishwasher fills but spray-arm water circulation is weak or absent
OEM dishwasher circulation pump motor and impeller assembly that moves water through the spray arms.
Part WPW10757216Replaces W10757216, W10231537, W10231538Whirlpool
OEM dishwasher circulation pump motor and impeller assembly that moves water through the spray arms.
Is This the Right Part?
Part NumberWPW10757216
ReplacesW10757216, W10231537, W10231538
ManufacturerWhirlpool
Appliance TypeDishwasher
Part TypeCirculation Pump Motor and Impeller Assembly
✅ Cross Reference Information
Current Part NumberWPW10757216
ReplacesW10757216, W10231537, W10231538
Common Symptoms
- Dishes are not cleaned properly
- Dishwasher fills with water but the spray arms do not spray effectively
- Humming or abnormal noise during the wash portion of the cycle
- Reduced water movement through the spray arms
Check Before Replacing
- With the dishwasher disconnected from power, inspect the spray arms and accessible filter area for debris that could restrict water flow.
- Confirm that the dishwasher fills with water and that the symptom occurs during the wash/circulation phase rather than the drain phase.
- With power disconnected, inspect the pump motor wiring connector and accessible hoses for loose connections, visible damage, or obstruction.
- If appropriate service documentation is available for the exact dishwasher model, follow its electrical test procedure; do not replace the pump based only on a symptom.
Pro Tip
A circulation-pump problem affects water delivery to the spray arms; it is different from a drain-pump problem, which removes water from the tub.
Part Details
Part NumberWPW10757216
Part TypeCirculation Pump Motor and Impeller Assembly
ManufacturerWhirlpool
Appliance TypeDishwasher
Primary FunctionCirculates dishwasher wash and rinse water through the spray arms using an integrated motor and impeller.
Cross ReferencesW10757216, W10231537, W10231538
Key Features
- Genuine Whirlpool OEM circulation pump motor and impeller assembly
- Integrated motor and impeller design
- Moves water through the dishwasher spray arms
- Used in the wash and rinse circulation system
Installation Notes
- Disconnect electrical power before installation.
- Shut off the dishwasher water supply before beginning work.
- Wear protective work gloves because access around the pump and dishwasher base may involve sharp edges.
- Use the service instructions for the exact dishwasher model and verify that electrical and hose connections are fully seated before testing.
- After installation, check for water leakage during an initial supervised cycle.
Verified Compatible Models
7DU1100XTSQ1, 7DU1100XTSQ2, 7DU1100XTSQ5, 7DU1100XTSS1, 7DU1100XTSS2, 7DU1100XTSS4, 7DU1100XTSS5, 66517742K013, 66517742K014, 66517742K015, 66517742K016, 66517749K013, 66517749K014, 66517749K015, 66517749K016
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
