Whirlpool Dishwasher Circulation Pump Motor and Impeller Assembly WPW10757216, Replaces W10757216, W10231537, W10231538

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dishes are not cleaned properly
• Dishwasher fills with water but the spray arms do not spray effectively
• Humming or abnormal noise during the wash portion of the cycle
• Reduced water movement through the spray arms

Check Before Replacing

• With the dishwasher disconnected from power, inspect the spray arms and accessible filter area for debris that could restrict water flow.
• Confirm that the dishwasher fills with water and that the symptom occurs during the wash/circulation phase rather than the drain phase.
• With power disconnected, inspect the pump motor wiring connector and accessible hoses for loose connections, visible damage, or obstruction.
• If appropriate service documentation is available for the exact dishwasher model, follow its electrical test procedure; do not replace the pump based only on a symptom.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before installation.
• Shut off the dishwasher water supply before beginning work.
• Wear protective work gloves because access around the pump and dishwasher base may involve sharp edges.
• Use the service instructions for the exact dishwasher model and verify that electrical and hose connections are fully seated before testing.
• After installation, check for water leakage during an initial supervised cycle.

Verified Compatible Models

7DU1100XTSQ1, 7DU1100XTSQ2, 7DU1100XTSQ5, 7DU1100XTSS1, 7DU1100XTSS2, 7DU1100XTSS4, 7DU1100XTSS5, 66517742K013, 66517742K014, 66517742K015, 66517742K016, 66517749K013, 66517749K014, 66517749K015, 66517749K016

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.