GE (General Electric) Refrigerator Door Handle Set / Handle Pack — Set of Three, Stainless WR01A02303, Fixes A broken, loose, missing, or visibly damaged door handle
Genuine OEM GE refrigerator handle pack containing three stainless door handles: two approximately 1-3/8 x 35-1/4 inches and one approximately 1-3/8 x 30-1/2 inches. The set includes refrigerator and freezer door handles and is documented for French-door and side-by-side refrigerators.
Confirm your full appliance model number before ordering.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Handle feels loose, moves, or rattles during use.
- Handle has cracked, broken, or separated from its mounting area.
- Handle is missing or cannot be securely attached.
- Handle finish is peeling, discolored, or cosmetically damaged.
- Door requires pulling at an unusual angle because the handle is damaged or improperly secured.
Check Before Replacing
- With the refrigerator stationary, gently test each handle for movement, rattling, cracking, or separation from the door; do not apply excessive force.
- Visually inspect the handle mounting points and exposed fasteners or set-screw areas for damage, looseness, or stripped hardware.
- Confirm that the replacement pack contains the expected three handles and compare the approximate lengths before installation: one 30-1/2-inch handle and two 35-1/4-inch handles.
- Verify that the handle profile, finish, mounting orientation, and door positions match the appliance-specific installation instructions.
- If a handle is loose, check whether it sits flush against the door and whether its mounting hardware is properly engaged; do not overtighten.
Pro Tip
Part Details
Installation Notes
- Use the appliance model's installation instructions because handle attachment methods and hardware can vary by refrigerator model.
- Keep the handle aligned and flush with the door while engaging the mounting hardware.
- GE guidance indicates that many stainless handles use a 3/32-inch or 1/8-inch Allen wrench for tightening; confirm the required size for the specific appliance before proceeding.
- Tighten only until secure and follow the model-specific instructions; GE warns that loose handles may result from improper installation and that over-tightening should be avoided.
- If the door, mounting insert, bracket, or fastener is damaged, stop and obtain the model-specific repair procedure or professional service rather than forcing the handle.
Verified Compatible Models
GFE26JMMAFES, GFE26JMMKFES, GFE26JMMNFES, GFE26JMMPFES, GFE26JMMTFES, GFE26JSMAFSS, GFE26JSMKFSS, GFE26JSMNFSS, GFE26JSMTFSS, GFE26JYMKFFS, GFE26JYMNFFS, GFE26JYMTFFS, GNE27ESMAFSS, GNE27ESMKFSS, GNE27EYMNFFS, GNE27JMMAFES, GNE27JMMKFES, GNE27JMMNFES, GNE27JSMAFSS, GNE27JSMDFSS, GNE27JSMKFSS, GNE27JSMNFSS, GNE27JSMTFSS, PFM27JSMAFSS, PFM27JSMKFSS, PNM27ESMKFSS, XFE26JSMKFSS
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
