GE Appliances / Mabe Refrigerator DC Evaporator Fan Motor Assembly WR01F04639, Replaces WR01F01624, WR60X10224, WR60X10307, 197D4968G006

Genuine GE/Mabe refrigerator evaporator fan motor; distributor documentation identifies it as a 12V, 4.5W evaporator-fan motor. It circulates refrigerated air through the fresh-food compartment.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Reduced airflow from refrigerator vents
• Freezer or refrigerator compartment becoming warmer than normal
• Grinding, squealing, or other abnormal fan noise
• Fan does not run when the refrigerator calls for cooling
• Frost buildup or blocked airflow around the evaporator cover

Check Before Replacing

• Disconnect power before accessing the evaporator-fan area.
• After removing only the model-appropriate access panel, inspect the fan blade for ice, frost, cracking, rubbing, or obstruction.
• Check that the motor wiring connector is fully seated and shows no visible heat damage or loose terminals.
• Confirm that the fan is not being prevented from operating by an open door switch or an active model-specific control condition.
• If the refrigerator provides a service-diagnostic fan test, use the model-specific procedure to observe whether the fan operates; do not replace the motor based on symptoms alone because frost, wiring, controls, or the door switch can produce similar symptoms.

Pro Tip

Part Details

Key Features

• Genuine GE Appliances service part
• Mabe/GE evaporator-fan motor assembly
• 12 VDC, 4.5 W specification documented by an appliance-parts distributor
• Designed to circulate air through the refrigerator fresh-food compartment
• GE product page advises confirming the refrigerator model number before purchase
• GE lists a one-year limited warranty for the genuine part

Installation Notes

• Unplug the refrigerator before beginning installation or accessing the fan assembly.
• Access is normally through the model-specific freezer or refrigerator evaporator-fan cover; follow the appliance service instructions for the exact model.
• Inspect and clear ice or foreign-object interference before installing the replacement motor.
• Disconnect and reconnect the motor wiring only with power removed, ensuring the connector is fully seated.
• Verify that the fan blade turns freely and does not contact the shroud or wiring before reinstalling the access panel.
• Confirm the replacement against the appliance model and the removed assembly before installation; GE states that compatibility should be checked by model number.

Verified Compatible Models

CSCP5UGXAFSS, CSCP5UGXCFSS, CSCP5UGXDFSS, CSHS5UGXBSS, CSHS5UGXCSS, CSHS6UGZBSS, CSHS6UGZESS, CSHS6UGZFSS, CSS25USWASS, CSS25USWCSS, CZS22MP2NBS1, CZS22MP2NJS1, CZS22MSKBHSS, CZS22MSKEHSS, CZS22MSKGHSS, CZS22MSKKHSS

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.