GE Range Rattling or Hardware Loose? Nut Retainer WS01A01373 – Fix Loose Range Components Fast

If your GE range has a rattling panel, loose burner grate hardware, or a fastener that won’t stay secured, a missing or damaged nut retainer is the most common cause. In most GE ranges, nut retainers are used throughout the range body to secure panels, brackets, and hardware components to sheet metal without requiring access to the back of the fastener. When a retainer clips out, breaks, or goes missing, the associated hardware becomes loose, rattles during operation, or falls out entirely. ⚡ A small part that causes big headaches when missing — common in GE, Hotpoint, and RCA ranges. Part WS01A01373 is the genuine OEM GE replacement nut retainer that clips back into position and locks hardware securely in place.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Range powers on and all burners/elements function normally
• ✔ The issue is mechanical — not electrical or heating-related
• ✔ A panel, bracket, or hardware component is loose, rattling, or missing a fastener
• ✔ ONLY problem is a missing or broken nut retainer clip at a fastener location

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Rattling or vibrating noise from the range body during operation
• Panel, bracket, or trim piece that is loose or won’t stay secured
• Screw or bolt that spins freely without tightening
• Missing nut retainer clip visible at a fastener location on the range body

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, clipping in the new WS01A01373 retainer restores a secure, rattle-free fit immediately.

📦 Part Details

• Part Number: WS01A01373
• Type: Range Nut Retainer / Speed Nut Clip — Genuine OEM GE
• Replaces: WS01A01373
• Brands: GE, Hotpoint, RCA

⚙️ Installation

Skill Level: EASY — 5–10 minutes. Disconnect power before servicing. Locate the fastener position where the retainer is missing or damaged. Align the new WS01A01373 retainer over the sheet metal opening and press firmly until it clips into place. Reinstall the screw or bolt through the retainer and tighten. Restore power and confirm the hardware is secure with no movement or rattle.

✓ Compatible Models

Confirmed compatible with GE, Hotpoint, and RCA range models using the WS01A01373 nut retainer. Contact us to verify your model number before ordering.

⚠️ Model-specific GE range repair pages: BIDIR hub links pending — handles must be verified before publishing.