WS01F03686 Valve Burner 3R
WS01F03686 Valve Burner 3R

GE Gas Range Burner Valve 3R WS01F03686, Replaces WB21K10141

Price
$93.64

Frequently Bought Together

Stock Notification

Get notified when this product is available again

⚠️ No Longer Available (NLA) — Discontinued by Manufacturer

GE WS01F03686 Gas Range Burner Valve 3R, Fixes Burner Ignition & Gas Flow Failures

Genuine GE burner valve for 3R burner positions on Café, Profile, and GE gas ranges. Replaces WB21K10141 when fitment is confirmed.

Part WS01F03686 Replaces WB21K10141 3R Burner Position OEM GE Part

The GE WS01F03686 Burner Valve 3R is designed to control gas flow to the right-rear burner on compatible GE, Café, and Profile gas ranges. It replaces WB21K10141 when fitment is confirmed by the appliance model number. This is an OEM part sourced directly from GE Appliances.

Is This the Right Part?

Part NumberWS01F03686
ReplacesWB21K10141
ManufacturerGE Appliances
Appliance TypeGas Range / Dual-Fuel Range

Confirm the complete model number before ordering. Similar burner valves may use different gas orifice sizes, inlet orientations, or mounting configurations that are not interchangeable.

Common Symptoms

  • Burner will not ignite or takes multiple attempts to light
  • Burner flame is uneven, weak, or extinguishes unexpectedly
  • Gas smell near the burner area when the valve is in the off position
  • Burner knob turns but no gas flow is detected at the burner

Check Before Replacing

  • Inspect the burner cap and ports for food debris or blockage — a clogged burner is the most common cause of ignition failure
  • Test the igniter spark module and igniter electrode for continuity and spark output
  • Verify the gas supply valve behind the range is fully open and gas pressure is within spec
  • Check the burner wiring harness and connector at the valve for corrosion or loose pins
Pro Tip: A faulty spark module or cracked igniter electrode can mimic a failed burner valve — always test the ignition system before replacing the valve. If the burner lights manually with a match but not with the igniter, the valve is likely fine and the ignition system is the root cause.

Part Details

Part TypeBurner Valve
Primary FunctionControls gas flow to the 3R (right-rear) burner
Key FeatureOEM GE replacement — direct fit, no modification required
ConditionOEM

Installation Notes

  1. Disconnect power and shut off the gas supply valve before beginning.
  2. Photograph wiring harness routing, valve orientation, and gas line connections.
  3. Compare the new valve with the original — verify orifice size, inlet direction, and mounting holes match exactly.
  4. Inspect the gas line fitting, burner wiring, and nearby connectors for wear or damage before reassembly.
  5. Restore gas and power, then test the burner for proper ignition, flame height, and absence of gas odour.

Gas parts must be installed by a licensed gas technician. Do not attempt this repair without proper certification and tools.

Verified Compatible Models

C2S985SET1SS, C2S985SET2SS, C2S985SET3SS, C2S985SET5SS, C2S985SET6SS, C2S985SET7SS, CGS985SET1SS, CGS985SET2SS, CGS985SET3SS, CGS985SET4SS, CGS985SET5SS, CGS985SET6SS, CGS985SET7SS, CGS990SET1SS, CGS990SET2SS, CGS990SET3SS, CGS990SET4SS, CGS990SET5SS, PGB930DET1BB, PGB930DET1WW, PGB930DET2BB, PGB930DET2WW, PGB930DET3BB, PGB930DET3WW, PGB930SET1SS, PGB930SET2SS, PGB930SET3SS, PGB935SET1SS, PGB935SET2SS, PGB935SET3SS, PG980SET1SS, PG980SET2SS, PGB980SET3SS

Fitment reminder: Match the complete model number, including suffixes and revision digits, before ordering.

✅Compatibility & Cross Reference

Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions