WS01F04305
Monitors oven temperature and controls oven heat.
GE Range Model CC2S985SET1SS Parts
MODEL PARTS & REPAIR GUIDE
GE CC2S985SET1SS Range Parts & Repair Guide
Find verified XPart replacement parts for GE Range model CC2S985SET1SS. Every product link below is matched to this exact model and checked against the live XPart catalog.
🇨🇦 Canadian Business Since 1996
⭐ 30 Years of Appliance Experience
🚚 Fast Shipping Across North America
✓ Wrong Part Protection
MODEL
CC2S985SET1SSGE Range
11 verified XPart product pages linked for this exact model.
Need help choosing the right part?
Not sure which part you need? Compare the part number on your original component and send XPart Supply your full model number CC2S985SET1SS and symptoms for fit help.
Find a Part by Symptom
Symptoms are a starting point only and can have more than one cause.
Oven will not heat.Will not startWill not programUneven flame at the center burner.Center-burner flames are uneven or higher on one side when the cap is not sitting flat.Cap is visibly damaged, warped, or will not rest level on the center burner head.Surface burner does not ignite.Uneven or poorly distributed flame when the cap is damaged, distorted, or improperly seated.Uneven flame patternFlame instability caused by a damaged or incorrectly seated burner capUneven or poorly distributed flame.Uneven flame pattern or localized hot spotsDelayed or difficult ignition when the cap is misaligned, wet, or obstructedUneven or improperly distributed surface-burner flame when the cap is damaged, missing, or incorrectly seated.
Replacement Parts for GE CC2S985SET1SS
Every product link below is checked against XPart's verified model-compatibility data and the live Shopify product page.
Controls & Electronics (3)
WS01F04306
Heating & Sensors (6)
WG02F04819
Covers the central gas-burner head and must sit flat and securely in its correct position to support proper ignition and flame pattern.
WS01F01134
Produces ignition spark for a surface burner.
WS01F02541
Covers and distributes gas flame across the 15,000-BTU surface-burner head.
Superseded by WS01F02544 — see linked XPart page for current replacement details.
WS01F02544
Sits on top of the 15,000-BTU burner head to protect it from spills and distribute the gas flame for even heating.
WS01F02546
Protects the burner head and helps spread the surface-burner flame evenly.
Replacement Parts (2)
WG02F01227
Provides the oven light lamp-and-holder assembly.
GE CC2S985SET1SS Compatibility
This guide is specifically for GE Range model CC2S985SET1SS. Only XPart product pages backed by verified model compatibility are linked here. Always compare the complete appliance model number and replacement part number before ordering.
Before You Order
- Confirm the complete appliance model number from the model/serial label.
- Compare the original component part number when it is visible.
- Review replacement or supersession information on the linked XPart product page.
- If diagnosis is uncertain, contact XPart Supply before ordering.
Frequently Asked Questions
Which parts fit CC2S985SET1SS?
The linked parts on this page are matched to GE Range model CC2S985SET1SS using XPart model-compatibility records.
How do I confirm the correct replacement?
Match the complete appliance model number and the original component part number, then review replacement details on the linked XPart product page.
What if I am not sure which part failed?
Use symptom information as a starting point and contact XPart Supply with the full model number and observed symptoms before ordering if diagnosis is uncertain.
- Choosing a selection results in a full page refresh.
