GE Range Anti-Tip Bracket WS01A00672 – Genuine OEM

The anti-tip bracket is a floor-mounted safety device required by UL standards on all freestanding ranges. It anchors to the floor behind the range and engages the rear leveling leg, preventing the range from tipping forward if weight is applied to an open oven door — such as a child climbing on the door or a heavy roasting pan placed on it. A tipped range can cause severe burns, scalding from spilled liquids, or crush injuries. Part WS01A00672 is the genuine OEM GE anti-tip bracket for compatible GE, Hotpoint, and Kenmore freestanding ranges, replacing WB2M2802. If your bracket is missing, damaged, or was never installed, replace it before using the range.

⚠️ Reasons You Need This Part

• Anti-tip bracket is missing — was never installed or lost during a move
• Bracket is bent, cracked, or damaged and no longer holds the leveling leg securely
• Range was moved for cleaning or repair and bracket was not reinstalled
• Range tips forward when the oven door is opened or weight is applied to the door
• Flooring was replaced and the bracket was removed and not reinstalled
• Home inspection or appliance service flagged a missing anti-tip bracket
• Range was purchased used or installed without the original bracket

✓ Part Details

• OEM Part Number: WS01A00672
• Replaces / Cross-References: WB2M2802
• Component: Anti-tip bracket — floor-mounted safety device that prevents freestanding range tip-over
• Compatible Brands: GE, General Electric, Hotpoint, Kenmore
• Condition: Genuine OEM — exact factory replacement
• Required by: UL 858 standard for freestanding ranges

⚙️ Installation Notes

• Skill Level: Basic — 15 to 20 minutes
• Pull the range away from the wall to access the floor behind the rear leveling legs
• Position the bracket on the floor so the slot aligns with the rear right leveling leg (or as specified in your range’s installation guide)
• Secure the bracket to the floor using the provided hardware — screw into a floor joist or use appropriate anchors for your floor type
• Slide the range back into position so the rear leveling leg drops into the bracket slot — verify the leg is seated in the slot, not resting on top of it
• Test by gently pulling the front of the range forward — it should not tip. If it tips, the leveling leg is not engaged in the bracket.
• Adjust the rear leveling leg height if needed so it seats properly in the bracket slot

✓ Compatible Models

Fits compatible GE, Hotpoint, and Kenmore freestanding ranges. Contact us at xpartsupply.com/pages/contact with your full model number to confirm fit before ordering.