GE / General Electric Range Igniter Glowbar (flat gas oven igniter / hot-surface igniter) WS01F07249, Replaces WB13X25262, 223C3381G036

Genuine OEM GE range oven igniter glowbar for gas ranges. The part has approximately 27-inch wire leads and is used to ignite the oven gas burner during bake or broil operation.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Oven burner does not ignite even though the igniter glows
• Delayed oven ignition or unusually slow preheating
• Intermittent oven heating
• Oven remains below the selected temperature
• Igniter is electrically open, cracked, or visibly damaged

Check Before Replacing

• With the oven controls off and the appliance cool, inspect the igniter through the burner area for cracks, breakage, or severe discoloration without touching it.
• Verify that the range has electrical power and that the gas supply is on before attributing a no-heat condition to the igniter.
• During a normal heating call, observe whether the igniter glows and whether the burner ignites; do not touch the igniter or bypass the safety valve.
• If model-specific service documentation and appropriate electrical-test procedures are available, have a qualified technician check igniter continuity/current draw and the related wiring and safety-valve circuit.
• If the igniter glows but the burner does not light, also check gas supply, burner obstruction, wiring, safety valve, and controls because the symptom is not conclusive by itself.

Pro Tip

Part Details

Key Features

• Genuine OEM GE range oven glowbar igniter
• Flat hot-surface gas igniter design
• Approximately 27-inch wire leads
• Used in the oven gas-burner ignition circuit
• Regional service-number relationship documented to U.S. GE number WB13X25262

Installation Notes

• Disconnect electrical power and shut off the gas supply before servicing the range.
• Allow the oven and igniter to cool completely before access or removal.
• Handle the ceramic igniter carefully; do not touch, bend, or strike the fragile heating element.
• Use the model-specific service documentation to identify the correct oven cavity, burner position, connector, and mounting arrangement.
• After installation, restore utilities and verify ignition operation safely; gas-appliance service should be performed by a qualified technician when required.

Verified Compatible Models

CGS990SET2SS, CGS990SET3SS, CGS990SET4SS, CGS990SET5SS, CGS990SET6SS, CGS990SET7SS, CGS990SET8SS, CGS990SET9SS, JGB850DEF1BB, JGB850DEF1WW, JGB850DEF2BB, JGB850DEF2WW, JGB850DEF3BB, JGB850EEF1ES, JGB850EEF2ES, CCGS990SET3SS, CCGS990SET5SS, CCGS990SET6SS, CCGS990SET7SS, CCGS990SET8SS, CCGS990SET9SS, EGPD7680I0A, JCGB850SEF3SS, JGB850EEF3ES, PCGS950SEF2SS, PCGS950SEF3SS, PCGS950SEF4SS, PCGS950SEF5SS, PGS950EEF2ES, PGS950SEF5SS

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.