OVEN DOES NOT HEAT OR IGNITES AFTER A LONG DELAY
GE / General Electric Range Igniter Glowbar (flat gas oven igniter / hot-surface igniter) WS01F07249, Fixes Oven does not heat or ignites after a long delay
Genuine OEM GE range oven igniter glowbar for gas ranges. The part has approximately 27-inch wire leads and is used to ignite the oven gas burner during bake or broil operation.
Part WS01F07249Replaces WB13X25262, 223C3381G036GE / General Electric
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWS01F07249
ReplacesWB13X25262, 223C3381G036
ManufacturerGE / General Electric
Appliance TypeRange
Part TypeRange Igniter Glowbar (flat gas oven igniter / hot-surface igniter)
✅ Cross Reference Information
Current Part NumberWS01F07249
ReplacesWB13X25262, 223C3381G036
Common Symptoms
- Oven burner does not ignite even though the igniter glows
- Delayed oven ignition or unusually slow preheating
- Intermittent oven heating
- Oven remains below the selected temperature
- Igniter is electrically open, cracked, or visibly damaged
Check Before Replacing
- With the oven controls off and the appliance cool, inspect the igniter through the burner area for cracks, breakage, or severe discoloration without touching it.
- Verify that the range has electrical power and that the gas supply is on before attributing a no-heat condition to the igniter.
- During a normal heating call, observe whether the igniter glows and whether the burner ignites; do not touch the igniter or bypass the safety valve.
- If model-specific service documentation and appropriate electrical-test procedures are available, have a qualified technician check igniter continuity/current draw and the related wiring and safety-valve circuit.
- If the igniter glows but the burner does not light, also check gas supply, burner obstruction, wiring, safety valve, and controls because the symptom is not conclusive by itself.
Pro Tip
Confirm the exact oven cavity and igniter position in the model-specific parts diagram before ordering; some GE double-oven ranges use different igniters for the upper and lower bake positions.
Part Details
Part NumberWS01F07249
Part TypeRange Igniter Glowbar (flat gas oven igniter / hot-surface igniter)
ManufacturerGE / General Electric
Appliance TypeRange
Primary FunctionHeats the gas oven igniter circuit so the compatible safety gas valve can open and the oven burner can ignite during bake or broil operation.
Installation Notes
- Disconnect electrical power and shut off the gas supply before servicing the range.
- Allow the oven and igniter to cool completely before access or removal.
- Handle the ceramic igniter carefully; do not touch, bend, or strike the fragile heating element.
- Use the model-specific service documentation to identify the correct oven cavity, burner position, connector, and mounting arrangement.
- After installation, restore utilities and verify ignition operation safely; gas-appliance service should be performed by a qualified technician when required.
Verified Compatible Models
CGS990SET2SS, CGS990SET3SS, CGS990SET4SS, CGS990SET5SS, CGS990SET6SS, CGS990SET7SS, CGS990SET8SS, CGS990SET9SS, JGB850DEF1BB, JGB850DEF1WW, JGB850DEF2BB, JGB850DEF2WW, JGB850DEF3BB, JGB850EEF1ES, JGB850EEF2ES, CCGS990SET3SS, CCGS990SET5SS, CCGS990SET6SS, CCGS990SET7SS, CCGS990SET8SS, CCGS990SET9SS, EGPD7680I0A, JCGB850SEF3SS, JGB850EEF3ES, PCGS950SEF2SS, PCGS950SEF3SS, PCGS950SEF4SS, PCGS950SEF5SS, PGS950EEF2ES, PGS950SEF5SS
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
