GE Range Control Panel Damaged or Faded? Oven Overlay WS01F07860 – Restore Your Panel Fast

If your GE Profile PCB985 range has a cracked, peeling, faded, or illegible control panel overlay, the WS01F07860 is the genuine OEM replacement that restores the panel to factory appearance. In most GE Profile built-in ranges, the control panel overlay is the printed graphic layer that labels all buttons, knobs, and function zones on the control fascia. When it cracks, peels, or becomes illegible from heat exposure or cleaning chemicals, the range remains functional but the panel becomes difficult or impossible to read safely. ⚡ A damaged overlay is a common cosmetic failure on the PCB985 series — and a direct safety concern when button labels are no longer readable. Part WS01F07860 is the genuine OEM replacement that restores the factory panel appearance, directly superseding 222D9173P017 with no modification required.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Range powers on and all functions operate normally
• ✔ Control board and buttons are functional — only the printed overlay surface is damaged
• ✔ Your model is PCB985EK1ES, PCB985EK2ES, PCB985SK1SS, or PCB985SK2SS
• ✔ The existing overlay is cracked, peeling, faded, or has illegible button labels
• ✔ ONLY problem is cosmetic damage to the control panel surface — not an electrical or functional fault

Not sure? Send us your model number — we’ll confirm before you order.

🔧 Common Symptoms

• Control panel overlay cracked, bubbling, or peeling away from the fascia
• Button labels faded or completely worn off — panel illegible
• Overlay discoloured or stained from heat exposure or cleaning chemicals
• Printed graphics scratched through from abrasive cleaning
• Panel looks worn or damaged despite the range functioning normally
• Overlay lifting at edges or corners — moisture getting underneath

✔ If these symptoms match, the control panel overlay is the correct replacement part.

✔ In most cases, replacing the overlay restores the factory panel appearance immediately.

📦 Part Details

• Part Number: WS01F07860
• Type: Range oven control panel overlay (T012) — printed graphic layer applied to the control fascia labelling all buttons, knobs, and function zones
• Replaces: OEM direct-fit overlay — supersedes 222D9173P017 (no modification required)
• Brands: GE, GE Profile

⚙️ Installation

Skill Level: EASY — 10 to 20 minutes. No power disconnect required for the overlay itself — this is a cosmetic surface replacement. Clean the existing fascia surface thoroughly and allow it to dry completely before applying the new overlay. Peel the backing from the new WS01F07860, align carefully to the button and knob positions before committing — the adhesive sets quickly. Press firmly from the centre outward to eliminate air bubbles, paying particular attention to edges and corners. Do not apply the overlay to a warm or damp surface — adhesion will fail and the overlay will peel.

💡 Pro Tip

🔗 Model Repair Pages

PCB985EK1ES, PCB985EK2ES, PCB985SK1SS, PCB985SK2SS

✓ Model-Specific Repair Pages