GE Range Won’t Heat or Display Is Dead? Oven Control Assembly WS01F09626 – Fix Oven Errors Fast
If your GE Profile PCB985 built-in range won’t heat, displays persistent error codes, or the control panel is completely unresponsive, a failed oven control assembly is the most likely cause. In most GE Profile built-in ranges, the oven control assembly is the combined control board and fascia unit that governs all cooking functions — managing oven temperature, convection, self-clean, and the user interface. When it fails, the range may refuse to heat, display fault codes that won’t clear, or go entirely dead. ⚡ The control assembly is the primary diagnosis when all other components test good and symptoms affect multiple functions simultaneously. Part WS01F09626 is the genuine OEM replacement that restores full range control, directly superseding WS01F07859, 295D1828G007, and 295D1828G024 with no modification required.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Range has power — breaker is on and the unit is confirmed live
- ✔ Bake and broil elements have been tested and are not open
- ✔ Temperature sensor (RTD probe) has been tested and reads within spec at room temperature (~1080Ω)
- ✔ Your model is PCB985DK1WW, PCB985EK1ES, or PCB985SK1SS
- ✔ ONLY problem is no heat, dead display, persistent error codes that won’t clear, or multiple functions failing simultaneously
Not sure? Send us your model number — we’ll confirm before you order.
🔧 Common Symptoms
- Oven won’t heat — bake or broil elements don’t activate despite correct settings
- Control panel completely dead — no display, no response to any input
- Persistent error or fault codes that won’t clear after unplugging and resetting
- Oven heats to wrong temperature or cycles on and off erratically
- Self-clean cycle won’t start or won’t complete
- Convection fan or multiple functions behave erratically or don’t respond to controls
✔ If these symptoms match, the oven control assembly is the most likely failed component in the system.
✔ In most cases, replacing the control assembly restores full range operation immediately.
📦 Part Details
- Part Number: WS01F09626
- Type: Range oven control assembly — combined control board and fascia unit governing oven temperature, convection, self-clean, and UI display
- Replaces: OEM direct-fit control assembly — supersedes WS01F07859, 295D1828G007, 295D1828G024 (no modification required)
- Brands: GE, GE Profile
A failed oven temperature sensor (RTD probe) causes the exact same no-heat and error code symptoms as a failed control assembly — and costs a fraction of the price. Test the sensor with a multimeter at room temperature; it should read approximately 1080Ω. Replace the sensor first if it’s out of spec before committing to a control assembly replacement.
⚙️ Installation Notes
Skill Level: MODERATE — 30 to 60 minutes. Disconnect power at the breaker before beginning — this assembly carries line voltage and must not be handled live. The control assembly is accessed from the front of the range by removing the control panel fascia screws. Photograph all wire harness connectors before disconnecting. The assembly is static-sensitive — avoid touching circuit traces. Release the assembly from its mounting clips, install the new WS01F09626 in the same position, reconnect all harnesses firmly, reassemble the fascia, restore power, and run a test cycle to confirm all functions operate correctly.
💡 Pro Tip
Before ordering, confirm power is reaching the assembly, test the temperature sensor and bake/broil elements with a multimeter, and check for any burnt connectors or heat damage on the existing board. If the assembly receives power, all inputs test good, and symptoms affect multiple functions simultaneously, the assembly is the correct diagnosis. Skipping this step is the most common cause of a costly misdiagnosis on high-value control parts.
🔗 Model Repair Pages
PCB985DK1WW, PCB985EK1ES, PCB985SK1SS
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
