Menu
⚠ This part has been superseded by a newer OEM part number.
WS01F10877 has been replaced by WS01F11904. We recommend ordering the current part for guaranteed fit and full lifespan.
Order WS01F11904 Instead →Oven Won’t Heat, Displays Error Codes, or Controls Are Unresponsive? The Control Board Is the First Place to Look.
When the oven control board fails, it loses the ability to regulate temperature, interpret sensor signals, or respond to user input — resulting in F-codes, erratic heating, a completely dead display, or an oven that won’t start at all. Part WS01F10877 is the genuine OEM replacement control board for GE ovens, superseding the earlier WS01F10655, and restores full electronic control and accurate temperature management.
⚠️ Symptoms of a Failed Oven Control Board
- Oven displays F-codes or error codes that won’t clear
- Oven won’t heat or heats erratically to the wrong temperature
- Control panel buttons are unresponsive or behave intermittently
- Display is blank, flickering, or showing garbled characters
- Oven starts on its own or won’t turn off
- Bake or broil elements won’t activate despite correct settings
✓ Part Details
- OEM Part Number: WS01F10877
- Superseded By: WS01F11904
- Also Replaces: WS01F10655
- Brand: GE
- Appliance Type: Oven / Range
- Part Type: Electronic Control Board (ERC)
- Condition: New Genuine OEM
💡 Pro Tip — Test the Temperature Sensor Before Replacing the Board:
A faulty oven temperature sensor (RTD probe) produces the same F-codes and erratic heating symptoms as a failed control board — and costs a fraction of the price. Before committing to a board replacement, test the sensor’s resistance with a multimeter (typically 1,080–1,090Ω at room temperature for GE ovens). If the sensor checks out, the board is the confirmed culprit. Replacing both at the same time eliminates the most common cause of repeat control failures.
A faulty oven temperature sensor (RTD probe) produces the same F-codes and erratic heating symptoms as a failed control board — and costs a fraction of the price. Before committing to a board replacement, test the sensor’s resistance with a multimeter (typically 1,080–1,090Ω at room temperature for GE ovens). If the sensor checks out, the board is the confirmed culprit. Replacing both at the same time eliminates the most common cause of repeat control failures.
⚙️ Installation Notes
Skill Level: Intermediate — comfort with appliance disassembly and ribbon/harness connector handling required.
⚠️ Always disconnect power at the breaker before accessing the control board.
Document all harness connector positions and ribbon cable orientations with photos before removal. Handle the board by its edges — avoid touching solder points or components. Reconnect all connectors firmly and verify no wires are pinched before restoring power.
✓ Compatible Models
Please verify your full model number before ordering. Contact us if your model is not listed and we’ll confirm compatibility.
Contact XPart Supply for model compatibility confirmation →
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
