OVEN DOES NOT HEAT IN BAKE MODE
GE (General Electric) Unit Bake Six Pas / Range Oven Bake Element WS01F11428, Replaces WB44K10012, WS01F02199, 183D9090P001, Fixes Oven does not heat in Bake mode
Genuine OEM lower bake heating element for electric GE ranges. It provides the primary bottom heat used during the oven bake cycle.
Part WS01F11428Replaces WB44K10012, WS01F02199, 183D9090P001GE (General Electric)
Genuine OEM lower bake heating element for electric GE ranges. It provides the primary bottom heat used during the oven bake cycle.
Is This the Right Part?
Part NumberWS01F11428
ReplacesWB44K10012, WS01F02199, 183D9090P001
ManufacturerGE (General Electric)
Appliance TypeRange
Part TypeUnit Bake Six Pas / Range Oven Bake Element
Common Symptoms
- The lower bake element has a visible crack or break after power is disconnected.
- The bake element stops heating because its circuit has opened.
- In a shorted-element failure, the sheath may rupture, briefly spark, produce a burning-plastic odor, and trip a fuse or circuit breaker.
Check Before Replacing
- Confirm the oven controls are set to Bake correctly before attributing the issue to the element.
- For a range with a mechanical self-clean door latch, confirm the latch is unlocked.
- Turn off the range circuit breaker (or remove the fuse) and unplug the range before inspecting the lower bake element for visible cracks or breaks.
- If the element is visibly cracked or broken, replacement is indicated; if it appears intact, other oven components or controls may be involved.
Pro Tip
Do not continue using the oven after a bake-element failure; if it sparks or trips the breaker, leave power off and arrange qualified service.
Part Details
Part NumberWS01F11428
Part TypeUnit Bake Six Pas / Range Oven Bake Element
ManufacturerGE (General Electric)
Appliance TypeRange
Primary FunctionProvides the lower-oven heat for the Bake cooking cycle.
Cross ReferencesWB44K10012, WS01F02199, 183D9090P001
Key Features
- Lower oven bake heating element for GE electric ranges.
- Six-pass bake-element configuration, as identified by the manufacturer part name.
- Supplies bottom heat for baking and cooking.
Installation Notes
- Disconnect power at the circuit breaker or fuse panel and unplug the range before servicing.
- Allow the oven and element to cool fully before handling.
- Use the model-specific GE replacement procedure; element mounting and access can vary by range model.
- After installation, restore power only after all electrical connections and the element mounting are secure.
Verified Compatible Models
EML535BBF0A, EML535NNF0A, JCB730DIF1WW, JCB730DK1BB, JCB730SIF1SS, JCB730SIF2SS, JCB730SK2SS, JCB735DIL1BB, JCB735DIL1WW, JCB735DIL2BB, JCB735DIL2WW, JCB735SIL1SS, JCB735SIL2SS, JCBP240DM1WW, JCBP240DT4WW
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
