GE Profile Range Touch Controls Not Responding, Display Blank, or WiFi Connectivity Lost? The Oven Glass Touch Control Is the Most Common Cause.
The oven glass touch control panel is the primary user interface on GE Profile slide-in gas ranges — it houses the capacitive touch glass, display, and integrated WiFi module that connects the range to the SmartHQ app. When it fails, touch inputs stop registering, the display goes blank or shows garbled content, and remote control via WiFi is lost entirely. The WS01L18513 is the genuine OEM replacement glass touch control with WiFi kit for compatible GE Profile 30” gas ranges, directly replacing 295D2563G020 and WS01F08890.
Symptoms of a Failed Oven Glass Touch Control
- Touch controls completely unresponsive — no reaction to finger input
- Display blank, dim, or showing only partial segments
- Specific touch zones work but others don’t
- Display flickering or showing garbled characters
- Range won’t start despite display appearing normal
- WiFi connectivity lost — range no longer appears in SmartHQ app
- Unable to pair or re-pair the range to the SmartHQ app
- Remote preheat and monitoring features no longer working
- Touch panel warm or hot to the touch
- Error codes displayed that won’t clear after power reset
- Range locks up mid-cycle and requires breaker reset to clear
Part Details
- OEM Part Number: WS01L18513
- Replaces: 295D2563G020, WS01F08890
- Type: Oven Glass Touch Control Panel with Integrated WiFi Kit
- Compatible Brands: GE Profile
- Compatible Series: P2S930, PC2S930, PCGS930 — 30” GE Profile gas ranges
- Includes: Touch glass panel + integrated WiFi module (SmartHQ compatible)
- Function: Capacitive touch input, oven display, temperature and mode control, WiFi connectivity for SmartHQ remote control and monitoring
Before ordering a replacement panel, perform a full hard reset: turn off the range at the breaker for 60 seconds, then restore power. If the touch panel responds normally after the reset but WiFi is still lost, the issue may be a SmartHQ pairing problem rather than a hardware failure — delete the range from the SmartHQ app and re-pair from scratch. Also check the ribbon cable connection between the touch panel and the main control board — a loose or corroded ribbon cable causes intermittent touch failure and display issues without any fault in the panel itself. Only replace the panel if the touch glass is physically cracked, the display is permanently blank after a hard reset, or the WiFi module fails to pair after multiple attempts with a confirmed working network.
Installation Notes
- Skill Level: Intermediate to Advanced — requires control console disassembly and ribbon cable handling
- Disconnect power at the breaker before starting — do not rely on the range’s power button
- Photograph all ribbon cable routing and connector orientations before disconnecting
- Handle ribbon cables with extreme care — they tear easily and ZIF connectors break if forced or lifted at the wrong angleVerify the replacement panel’s ribbon connector matches the existing harness before installation
- Do not overtighten any mounting screws — glass control panels crack easily under uneven pressure
- After installation, restore power and run a full function test across all touch zones and display segments
- Re-pair the range to the SmartHQ app after installation — the new WiFi module will require fresh pairing
- If error codes persist after replacement, the main control board may also require attention
Compatible Models
P2S930YP1FS, PC2S930YP1FS, PCGS930YP1FS — GE Profile 30” Gas Range (Stainless)
Contact us with your full model number to confirm fitment before ordering.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
