Menu
WW01A00814 GE Washer Whole Tub Kit – Fix Tub Cracks, Bearing Failure, or Persistent Leaks on Your GE Top-Load Washer
OEM Replacement | Replaces 233D3158G003 | Fits GTW550 • GTW560 • GTW575 • GTW580 Series | Fast Canada-wide shipping | Guaranteed fit
The WW01A00814 is the OEM whole tub kit for GE top-load washers. The tub assembly is the outer drum that holds the wash water and supports the inner spin basket, bearings, and seal. When the tub cracks, the bearing fails, or the tub seal deteriorates, the washer will leak water onto the floor, produce loud grinding or rumbling noises during spin, or allow water to escape into the motor area. This kit includes the complete tub assembly and is the current OEM replacement for 233D3158G003.
✓ Model-Specific Repair Pages
We’ve built dedicated parts & repair guides for the models this tub kit fits. Click your model below for a full parts list and troubleshooting guide:
MODEL
GE
GE GTW550BMR0WS
GE GTW560BMM0WW
GE GTW575BMM0WS
GE GTW575BMM1WS
GE GTW580BMR0WS
GE GTW580BMR1WS
Don’t see your model? Contact us with your model number and we’ll confirm compatibility.
This is a major repair part — the whole tub kit is typically the final repair option before appliance replacement. It is most commonly needed when the tub bearing has failed (loud grinding during spin) or when the tub has cracked and is leaking. OEM replacement parts are not affiliated with, sponsored by, or endorsed by GE or any OEM manufacturer.
✓ Common Symptoms Fixed
- Water leaking onto the floor during wash or spin cycle
- Loud grinding, rumbling, or roaring noise during spin
- Tub wobbles or is visibly off-centre during spin
- Water leaking into the motor or cabinet area
- Visible cracks in the outer tub
- Bearing noise that worsens progressively over time
✓ Key Features & Specifications
- OEM Part Number: WW01A00814
- Replaces: 233D3158G003
- Appliance Type: Top-Load Washer
- Component: Whole Tub Kit (complete outer tub assembly)
- Compatible Brands: GE
- Direct OEM fit — no modification required
- Brand new genuine GE part
✓ Buying Options
- New (WW01A00814): Genuine GE OEM whole tub kit — complete assembly, guaranteed fit and full lifespan
✓ Installation Tips
- Difficulty: Advanced
- Time: 2–4 hours
- Tools needed: Socket set, spanner wrench, work gloves, helper recommended
- Steps: Unplug washer and disconnect water supply → remove lid, cabinet panels, and control console → disconnect all hoses, wiring harnesses, and the drive system → lift out the inner basket and agitator → remove the old tub assembly → transfer any reusable components to the new tub → reinstall in reverse order → reconnect all hoses and wiring → run a full test cycle and check for leaks
- Important: This is a major disassembly repair. Document all wiring and hose connections with photos before disconnecting anything.
- Safety note: Always unplug and disconnect water before servicing. Have a helper available — the tub assembly is heavy.
✓ Compatible Models
- GTW550BMR0WS ✓ Confirmed fit for GTW550BMR0WS
- GTW560BMM0WW ✓ Confirmed fit for GTW560BMM0WW
- GTW575BMM0WS ✓ Confirmed fit for GTW575BMM0WS
- GTW575BMM1WS ✓ Confirmed fit for GTW575BMM1WS
- GTW580BMR0WS ✓ Confirmed fit for GTW580BMR0WS
- GTW580BMR1WS ✓ Confirmed fit for GTW580BMR1WS
✓ Replacement Part Numbers
- WW01A00814
- 233D3158G003
- WW01A00814XP (aftermarket cross-reference)
✓ Frequently Asked Questions
Does WW01A00814 replace 233D3158G003?
Yes — WW01A00814 is the current OEM part number and directly replaces 233D3158G003. See the compatible models list above or contact us to confirm fit for your model.
How do I know if I need the whole tub kit vs. just the bearing or seal?
On most GE top-load washers, the bearing and seal are not sold separately — the whole tub kit is the correct repair. If you hear grinding during spin or have a persistent leak at the tub seal, this kit is the right part. Contact us to confirm before ordering.
Is this a DIY repair?
Advanced difficulty — this is a major disassembly repair requiring full cabinet removal and tub replacement. Estimated time: 2–4 hours. A helper is recommended. Contact us if you need guidance or want to discuss whether repair vs. replacement makes more sense for your appliance.
Should I repair or replace my washer?
At $482, this repair makes sense if your washer is otherwise in good condition and less than 8–10 years old. If the machine has other issues or is older, compare the repair cost against a used or refurbished replacement. Contact us — we carry used appliances and can help you decide.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
