Menu
The WW01F01662 is the OEM washplate (wash disc / impeller plate) for GE GTW-series top-load washers and select LG-platform models. The washplate sits at the bottom of the wash drum and creates the water movement that cleans clothes — it spins and oscillates to generate the wave action that lifts dirt and detergent through the load. When it cracks, breaks, or loses its fins, clothes don’t agitate properly, detergent residue builds up, and cleaning performance drops significantly. It replaces 233D1974P001.

The WW01F01662 washplate is a direct OEM replacement manufactured to GE’s original specifications. It is compatible with GE GTW-series top-load impeller washers and a wide range of LG-platform models (LMH, LMC, LGA, WMH series). The washplate mounts to the drive shaft at the bottom of the drum and is secured by a single centre bolt. Sold individually.
Clothes not getting clean or coming out with detergent residue — Washer not agitating or creating proper water movement — Cracked, broken, or missing fins on the washplate — Loud scraping or grinding noise during the wash cycle — Washplate wobbles or spins unevenly — Clothes tangled or not moving freely in the drum
OEM Part Number: WW01F01662 — Replaces: 233D1974P001 — Type: Washer washplate (impeller disc) — Compatible with GE GTW-series and LG-platform top-load impeller washers — Mounts to drive shaft at drum bottom — Sold individually
OEM New: Factory-original washplate manufactured to GE’s original specifications. Sourced from authorized OEM distribution channels. Aftermarket replacement parts are not affiliated with, sponsored by, or endorsed by GE or any OEM manufacturer.
WW01F01662 (OEM) — 233D1974P001 (superseded) — WW01F01662XP (aftermarket cross-reference)
Unplug the washer before beginning. Open the lid and remove any laundry. The washplate is secured by a single centre bolt at the bottom of the drum — use a socket wrench to remove it. Lift the old washplate straight up off the drive shaft. Seat the new washplate onto the shaft, aligning the splines, and torque the centre bolt to spec. Plug the washer back in and run a short cycle to confirm proper operation. Most installations take 10–20 minutes.
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.