Menu
The heater and housing assembly is the complete heating unit in your GE compact electric dryer — the nichrome coil element mounted inside its metal housing that generates all the heat for every drying cycle. When the coil burns through from restricted airflow, a power surge, or normal wear, the dryer tumbles normally but produces zero heat. Clothes come out as damp as they went in, or the dryer runs for hours without finishing. The WW02F00007 GE OEM Dryer Heater & Housing is the factory-specified complete replacement assembly that restores full heating on every cycle.
✓ Symptoms This Fixes
- Dryer runs and tumbles but produces no heat at all
- Clothes remain damp or wet after a full cycle
- Dryer takes 2–3+ cycles to dry a normal load
- Dryer shuts off mid-cycle with clothes still damp
- Thermal fuse keeps blowing (element overheating from restricted airflow)
- Burning smell from inside the dryer cabinet
- Visible break or gap in the heating coil
✓ Part Details
- OEM Part Number: WW02F00007
- Cross-References: WE11X20397, AP5809968, 189D7110G009, WE11M30, WE11M42, PS9494500
- Brand: GE OEM
- Component: Dryer heater and housing assembly (complete unit — heating element coil and metal housing)
- Appliance Type: GE compact electric dryer (24" stackable / unitized)
- Compatible Brands: GE, Hotpoint
- Genuine OEM: Yes — factory-specified replacement
Pro Tip — Replace the Thermal Fuse and Clean the Exhaust Vent Before Closing Up:
Restricted airflow causes the majority of heating element failures in compact dryers — the coil overheats and burns through, and the thermal fuse blows at the same time. If you replace only the heater assembly without the thermal fuse, the dryer still won’t heat. Always replace both together. Compact dryers are especially prone to lint buildup in short, kinked exhaust runs — before reassembling, disconnect the exhaust duct and blow it out completely. A clogged vent will destroy the new element by the same overheating mechanism within months. Confirm the new element reads continuity with a multimeter before closing the cabinet.
Restricted airflow causes the majority of heating element failures in compact dryers — the coil overheats and burns through, and the thermal fuse blows at the same time. If you replace only the heater assembly without the thermal fuse, the dryer still won’t heat. Always replace both together. Compact dryers are especially prone to lint buildup in short, kinked exhaust runs — before reassembling, disconnect the exhaust duct and blow it out completely. A clogged vent will destroy the new element by the same overheating mechanism within months. Confirm the new element reads continuity with a multimeter before closing the cabinet.
✓ Installation Notes
- Skill Level: Intermediate — requires rear or front panel removal depending on model
- Estimated Time: 45–75 minutes
- Key Steps: Disconnect power at the breaker (240V — never work live) → Pull dryer away from wall and disconnect exhaust duct → Remove rear access panel screws → Photograph wiring connections to heater terminals before disconnecting → Note position of thermal fuse and high-limit thermostat on housing → Remove mounting screws and pull heater assembly out → Transfer thermal fuse and thermostat to new housing if not included → Seat new assembly and secure mounting screws → Reconnect wiring in original positions → Reassemble panel → Reconnect exhaust duct → Restore power and run a timed cycle to verify heat
- Safety: This element operates at 240V — always disconnect power at the breaker before beginning. Never work on a live appliance. Confirm all wiring connections are secure before restoring power.
✓ Compatible Models
GE / Hotpoint Compact Dryers: GTUP240EM0WW, GTUP240EM1WW, GTUP240EM2WW, GTUP240EM3WW, GTUP240EM4WW, GTUP240EM5WW, GUAP240EM0WW, GUAP240EM1WW, GUAP240EM3WW, GUAP240EM4WW, GUAP240EM5WW, GUD24ESMJ0WW, GUD24ESMJ1WW, GUD24ESMM0WW, GUD24ESSJ1WW, GUD24ESSM0WW, MCL6040ESBB0, MCL6040ESBB1, MCL6040ESBB11
Contact us with your full model number to confirm compatibility before ordering.
✓ Why XPart Supply
- Canadian Business Since 1996 — 30 Years of Appliance Parts Expertise
- Guaranteed Fit — OEM parts matched to your exact model
- Fast Canada-Wide Shipping
- Trusted by DIYers and Appliance Technicians Across Canada
- Expert support to confirm compatibility before you order
✓ Frequently Asked Questions
Is WW02F00007 the same as WE11X20397?
Yes — WE11X20397, AP5809968, 189D7110G009, WE11M30, WE11M42, and PS9494500 are all superseded or cross-reference part numbers for the same GE compact dryer heater and housing assembly. WW02F00007 is the current active OEM part number and is a direct replacement for all of these.
Do I need to replace the thermal fuse at the same time?
Yes — strongly recommended. If restricted airflow caused the element to burn out, the thermal fuse almost certainly blew at the same time. Replacing only the heater assembly without the thermal fuse will result in a dryer that still won’t heat. Replace both together for a complete repair.
Does XPart Supply ship dryer parts across Canada?
Yes! XPart Supply ships OEM and aftermarket dryer parts Canada-wide with fast, reliable shipping. We've been serving Canadian appliance repair customers since 1996 and offer guaranteed fit on all parts. Contact us if you need help confirming compatibility with your model.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
