AGITATOR NOT MOVING OR SPINNING
GE Appliance Bolt WW03A00244, Fixes Agitator not moving or spinning
Genuine GE 27-inch washer agitator kit with bolt for the washer section of compatible laundry centers; the agitator moves clothing within the tub during washing.
Part WW03A00244Replaces 233D2740G001GE
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWW03A00244
Replaces233D2740G001
ManufacturerGE
Appliance TypeAppliance
Part TypeBolt
✅ Cross Reference Information
233D2740G001
Common Symptoms
- Agitator not moving or spinning
- Clothes not cleaning properly
- Unusual noises during wash
- Loose or wobbly agitator
- Visible cracks or broken fins
- Agitator dogs slipping or not engaging
Check Before Replacing
- Confirm the drive motor runs during the wash cycle — if the motor is silent, the issue is upstream of the agitator
- Check the retaining bolt beneath the agitator cap — a loose bolt allows the agitator to spin freely on the shaft without the assembly being damaged
- Inspect the drive hub splines for rounding or wear — a damaged hub will strip a new agitator quickly and cause a repeat failure
- Check the agitator dogs (small plastic ratchet cogs inside the upper agitator) — worn dogs cause one-direction-only agitation and are a cheaper fix than a full assembly replacement
Pro Tip
Inspect agitator dogs (if present) and replace if worn.
Part Details
Part NumberWW03A00244
Part TypeBolt
ManufacturerGE
Appliance TypeAppliance
Installation Notes
- CRITICAL SAFETY WARNING:
- Unplug washer before servicing.
- Unplug washer
- from wall outlet.
- Remove fabric softener dispenser
- (if present) from top of agitator.
- Unscrew agitator bolt
- (usually beneath cap or dispenser) using socket or wrench.
- Lift old agitator assembly
- straight up and out of tub.
- Clean mounting hub and inspect for debris or wear.
- Align new agitator
- over drive hub and lower into place.
- Secure with agitator bolt
- (torque to manufacturer spec).
- Reinstall fabric softener dispenser or cap.
- Plug in washer
- and run a test cycle to verify proper agitation and no unusual noises.
- Safety Notes:
- Use only OEM bolts/washers. Do not overtighten to avoid cracking agitator base.
✅ Cross Reference Information
233D2740G001
Verified Compatible Models
CLME71214BAT00, GUD27ESMM0WW, GUD27ESMM1WW, GUD27ESPM0DG, GUD27ESPM1DG, GUD27ESSM0WW, GUD27ESSM1WW, GUD27GSPM0DG, GUD27GSPM1DG, GUD27GSSM0WW, GUD27GSSM1WW, GUD27GSSM2WW, GUD37ESMM0DG, GUD37ESMM1DG, GUV27ESSM1WW, XUD27ESSM1WW, XUD27GSSM1WW, GUD27EEMNWW, GUD27ESMMWW, GUD27GSSMWW, GUD37EEMNDG, GUD37ESMMDG
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
