GE Washer Outer Tub Kit WW03A00274

The GE WW03A00274 Outer Tub Kit is designed to restore the outer tub, subwasher hub, bearing, and seal on compatible GE top-load washers in a single repair. This complete OEM kit includes the main outer tub, subwasher hub, tub bearing, tub seal, and mounting hardware — everything needed to return the washer to factory condition without sourcing individual components separately.

Is This the Right Part?

Confirm the complete model number before ordering. Similar tub kits may use different hub dimensions, bearing sizes, or mounting configurations. Always verify your model number before purchasing.

Common Symptoms

• Water leaking from under the washer during or after a cycle
• Loud grinding or rumbling noise during spin
• Washer drum wobbling or producing severe off-balance loads
• Poor agitation or weak spin performance
• Visible cracks in the outer tub
• Washer stopping mid-cycle due to imbalance faults
• Hub cracking or bearing failure after extended use

Check Before Replacing

• Confirm the leak originates from the tub or bearing area — not from hose connections, the pump, or the door seal
• Check the inner basket for damage or wobble that may indicate hub or bearing failure
• Inspect the drive components (agitator, wash plate, drive block) for wear before disassembly
• Verify the model number against the confirmed compatible list before ordering — this is a major repair

Part Details

Installation Notes

1. Disconnect power and shut off the water supply before beginning this repair.
2. Photograph wiring, hose routing, clamps, and mounting positions before disassembly.
3. Remove cabinet panels, agitator or wash plate, inner basket, and drive components to access the outer tub.
4. Compare the new tub and hub with the originals before installation — confirm bearing and hub dimensions match.
5. Replace the tub bearing and seal together with the new tub — never reuse old bearings.
6. Reconnect all water hoses and run a full test cycle before reassembling panels.
7. Inspect packaging for damage upon delivery before signing — oversize freight item.

This is a major disassembly repair rated 4/5 difficulty. Professional repair time is 60–90 minutes; DIY time may be 2–3 hours. Use a qualified technician when diagnosis or installation is outside your experience.

Verified Compatible Models

GUD24ESMMWW, GUD24ESSMJWW, GUD24GSSMWW, GUD24ESMM1WW

Fitment reminder: Match the complete model number, including suffixes and revision digits, before ordering. Also compatible with select GE, Hotpoint, Mabe, and Kenmore top-load washers that share the GE platform — contact us to verify your model before ordering.