GE Dryer Power cord cross-reference/replacement number 248C1014G001 WW03F00109

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dryer will not start
• Dryer has no power
• Intermittent or faulty electrical connection associated with a damaged cord

Check Before Replacing

• Confirm that the appliance is an electric dryer and that the household receptacle matches the required cord configuration.
• With the dryer unplugged and the circuit breaker switched off, visually inspect the cord, plug, strain-relief area, and terminal-block connections for fraying, loose connections, scorching, arcing, or melted insulation.
• If the dryer has no power, verify that the circuit breaker has not tripped and have the receptacle tested by a qualified person.
• Do not energize or operate the dryer if the cord or terminal block shows heat damage.

Pro Tip

Part Details

Installation Notes

• Disconnect the dryer from electrical power before servicing; this is a high-voltage connection.
• Use the cord configuration and connection method specified in the dryer's installation instructions and local electrical code.
• Route the cord through the appropriate strain relief.
• Connect conductors only to the terminals identified by the appliance installation instructions.
• Reinstall the terminal-block cover after installation.
• If the cord, receptacle, terminal block, or wiring shows burning or arcing, use a qualified technician or electrician.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.