Whirlpool Washer Suspension Rod Support W10440729, Replaces W10560146, W10405423, W10316397, W10256551, W10215136

Genuine Whirlpool OEM washer suspension rod support set. The package contains eight plastic supports: four of each of two types, approximately 1.5 inches in diameter. The supports secure the washer suspension rods and help reduce shaking, movement, noise, and spinning problems.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Washer shakes, walks, or bangs during spin
• Persistent out-of-balance behavior during spin
• Increased vibration or suspension-related noise
• Visible cracked, worn, displaced, or broken rod support

Check Before Replacing

• Disconnect electrical power before inspection or service.
• With the washer empty and power disconnected, visually inspect the suspension rod supports for cracks, deformation, displacement, or missing pieces.
• Confirm that each suspension rod is seated correctly in its support and that the support is not visibly damaged.
• If the washer is shaking, first check that the load is reasonably distributed and that the washer is level; these conditions can produce similar symptoms.
• Do not treat a damaged support as proof that it is the only cause of the washer problem; inspect the other suspension components if symptoms remain.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM suspension rod support set for washers
• Eight plastic supports are included: four of each of two types
• Supports are approximately 1.5 inches in diameter
• Designed to secure the washer suspension rods
• Used in Whirlpool-family and selected Kenmore washer applications

Installation Notes

• Disconnect power before installation and wear appropriate hand protection.
• Access to the suspension supports requires opening or removing washer cabinet panels according to the appliance’s service procedure.
• Keep the washer lid secured while the cabinet is open so it cannot open unexpectedly.
• Support or control the suspension rod while releasing and reseating it; ensure the rod and support are fully seated before reassembly.
• Reassemble all removed panels and confirm the suspension components are correctly positioned before reconnecting power.
• Follow the exact service instructions for the washer model; this support set is not a complete suspension-rod assembly.

Verified Compatible Models

110.20022013, WTW4915EW1, WTW5000DW1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.