XP10820036 Dryer Door Switch Kit, Replaces W10820036
XP10820036 Dryer Door Switch Kit, Replaces W10820036
XP10820036 Dryer Door Switch Kit, Replaces W10820036
XP10820036 Dryer Door Switch Kit, Replaces W10820036

Whirlpool Dryer Laundry appliance door switch kit W10820036, Replaces 83333, 8224, 388322, 359230, 347207

XPart Number XP10012561
Price
$40.98
Available by special order

Frequently Bought Together

Check Fit & Find Parts
Bubba checks verified models, product descriptions, cross-references and store data. Find your model number →
APPLIANCE WILL NOT START BECAUSE THE DOOR/LID SWITCH DOES NOT CLOSE THE OPERATING CIRCUIT

Whirlpool Dryer Laundry appliance door switch kit W10820036, Fixes Appliance will not start because the door/lid switch does not close the operating circuit

Genuine Whirlpool door-switch kit for laundry appliances. The kit includes a switch, dryer mounting bracket, two wire terminals, and two mounting screws. It prevents the dryer or washer from operating when the door or lid is open.

Part W10820036Replaces 83333, 8224, 388322, 359230, 347207Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.

Is This the Right Part?

Part NumberW10820036
Replaces83333, 8224, 388322, 359230, 347207
ManufacturerWhirlpool
Appliance TypeDryer
Part TypeLaundry appliance door switch kit

✅ Cross Reference Information

Current Part NumberW10820036
Replaces83333, 8224, 388322, 359230, 347207

Common Symptoms

  • Dryer or washer will not start when the door or lid is closed
  • Appliance stops when the door or lid is moved or opened
  • Dryer may not run after the door is closed
  • Washer may not agitate or drain when the lid is closed

Check Before Replacing

  • Disconnect power before inspecting the switch, terminals, bracket, or wiring.
  • Confirm the door or lid physically presses the switch actuator fully when closed; check for misalignment, damage, or an obstruction.
  • Inspect the two switch terminals and nearby wiring for looseness, corrosion, or visible damage without bypassing the safety switch.
  • With power disconnected, compare the switch’s mechanical action with the door/lid movement; it should actuate consistently rather than sticking or remaining depressed.
  • Verify the appliance model’s parts diagram before replacement because the kit is used across different laundry-appliance designs.

Pro Tip

If the appliance starts only when the door or lid is pressed, lifted, or held in a particular position, check door/lid alignment and switch-actuator contact before condemning the switch.

Part Details

Part NumberW10820036
Part TypeLaundry appliance door switch kit
ManufacturerWhirlpool
Appliance TypeDryer
Primary FunctionActs as the safety interlock for a compatible Whirlpool-family dryer door or washer lid, preventing operation when the door or lid is open.

Installation Notes

  • Disconnect electrical power before installation.
  • Use the appliance’s model-specific parts diagram or service literature to identify the switch location and wiring arrangement.
  • Transfer or reconnect terminals only after matching them to the original arrangement; do not bypass the safety interlock.
  • Use the included bracket, terminals, and screws only where specified by the appliance’s model-specific installation procedure.
  • After installation, confirm that the closed door or lid actuates the switch and that the appliance does not operate with the door or lid open.

Verified Compatible Models

1106914754, 11072482210, 11072482600, 11072482800, 11072483110, 11072483120, 11072483210, 11072483400, 11076483430, 11081475300, 11081475400, 11086171200, 11088724890, 11089416830, 11089419820

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions